Skip to content
RobothecaBeta
Log in

Robots you may use commercially

Robots whose licenses allow commercial use. 182 robots on Robotheca, each with its licenses and its source on GitHub.

Filters

Type
Level
Buildability

Ready to build: a score of 80 or more, a license and a finished design.

Options
Labels
Origin

Where the project was published, known for 29 of 270 robots. Never guessed.

Guide translated from

Guides machine-translated into English by Robotheca, with a link to the original on each robot page.

37 of 270 robots state a cost. Costs in other currencies are compared using the ECB reference rate of 15 Oct 2026. Robots without a known cost are hidden unless you include them.

Clear filters
Sort:Most buildable
GridList

182 robots of 270

Page 3 of 8 · Ready to build first, then by buildability

  • Asimov 1

    An open-source 1.2 m, 35 kg humanoid biped with 25 actuated degrees of freedom that can be built, simulated and customized.

    HumanoidAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • Balance Ball

    A spherical robot that balances and maneuvers in three degrees of freedom using three orthogonal flywheels and a omnidirectional wheel base.

    OtherAdvancedBuildability 55/100 · Buildable with some effort
    ¥1,000≈ €133 (ECB rate, 15 Oct 2026)

  • Bambot

    An open-source, low-cost humanoid robot designed for AI experimentation and education.

    HumanoidIntermediateBuildability 55/100 · Buildable with some effort
    • Work in progress
    • Works with AI
    $300≈ €268 (ECB rate, 15 Oct 2026)

  • CocoNuts

    An open-source humanoid robotics research platform that minimizes leg inertia by concentrating mass near the limb roots using timing belts and parallel linkages.

    HumanoidAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • CUBOTino autonomous

    A small, 3D printed robot that solves a Rubik's cube autonomously on a Raspberry Pi.

    OtherIntermediateBuildability 55/100 · Buildable with some effort
    Cost not stated

  • Dagor Biped

    A low-cost, easy-to-print biped robot hardware design remixed from the Open Robot Dynamic Initiative Bolt robot, controlled by the Dagor brushless motor control module.

    OtherAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • ElectronBot

    A mini desktop robot with 6 degrees of freedom, USB communication, and a display screen, inspired by WALL-E's EVE.

    HumanoidAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • ElectronBot

    A robotic arm that can be controlled via Python, with servo control, image transmission, and integration with Unity for 3D visualization.

    Robot armIntermediateBuildability 55/100 · Buildable with some effort
    Cost not stated

  • EquiCycle

    An autonomous self-balancing bicycle robot designed for outdoor track racing, featuring lane detection, obstacle recognition, and balance control algorithms.

    Self-driving 1:10AdvancedBuildability 55/100 · Buildable with some effort
    • Works with AI
    Cost not stated

  • Just1

    An open-source autonomous mecanum wheel robot for learning and experimentation that navigates manually or autonomously using a Lidar.

    WheeledIntermediateBuildability 55/100 · Buildable with some effort
    $250≈ €223 (ECB rate, 15 Oct 2026)

  • Kayra

    An easy to modify, 3D printable open-source humanoid robot evolved by the community that walks, lifts and can be simulated.

    HumanoidIntermediateBuildability 55/100 · Buildable with some effort
    Cost not stated

  • MABEL

    MABEL is an open-source legged balancing robot based on the Boston Dynamics Handle, with articulated legs that can adjust height and balance in multiple axes.

    OtherAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • OpenBot

    A low-cost small electric vehicle body that uses an Android smartphone as its brain, supporting person following and autonomous navigation.

    WheeledIntermediateBuildability 55/100 · Buildable with some effort
    • Works with AI
    $50≈ €45 (ECB rate, 15 Oct 2026)

  • OpenPerseverance

    A 3D printed, remote controlled rover modeled on NASA's Perseverance Mars rover, built from open-source printable parts.

    WheeledAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • Papaya Pathfinder

    Open-source, fully 3D-printable ESP32 rover platform with WiFi or ExpressLRS control, available in two variants.

    WheeledBeginnerBuildability 55/100 · Buildable with some effort
    Cost not stated

  • SoftRobotETF

    A low-cost, modular open-source soft robotics platform with tendon-driven continuum robots controlled by force-feedback actuators over serial and I2C.

    OtherAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • SpotMicro ESP32

    A 3D-printable quadruped robot dog with support-free printed parts, controlled by an ESP32-DevKitC with heavy computation offloaded to external devices.

    QuadrupedAdvancedBuildability 55/100 · Buildable with some effort
    Cost not stated

  • T-Robot

    A DIY omnidirectional mobile robot that supports 2D lidar mapping and autonomous navigation using Micro-ROS and ROS2.

    WheeledIntermediateBuildability 55/100 · Buildable with some effort
    Cost not stated

  • Watney

    Watney is a low-cost, 3D-printable, Raspberry Pi-based FPV telepresence rover with HD video and bi-directional audio.

    WheeledIntermediateBuildability 55/100 · Buildable with some effort
    Cost not stated

  • Yertle

    A 3D printed quadrupedal robot with 4 limbs of 3 degrees of freedom each, built for locomotion research and reinforcement-learned walking.

    QuadrupedAdvancedBuildability 55/100 · Buildable with some effort
    • Works with AI
    £250≈ €295 (ECB rate, 15 Oct 2026)

  • Borinot

    An open-source, torque-controlled aerial loco-manipulator whose extremity can be reconfigured as a tail for flight, a hand for manipulation, or a leg for hybrid aerial-contact locomotion.

    DroneAdvancedBuildability 51/100 · Buildable with some effort
    Cost not stated

  • AcroMonk

    A minimalist underactuated brachiating robot that swings along a horizontal ladder bar using one quasi-direct drive actuator and passive grippers.

    OtherAdvancedBuildability 50/100 · Buildable with some effort
    • Works with AI
    Cost not stated

  • Antagonistic Tendon Driven Continuum Robot

    A research continuum robot with 4 degrees of freedom that drives two tendons per antagonistic pair with a single servo and measures tendon force with load cells.

    OtherAdvancedBuildability 50/100 · Buildable with some effort
    Cost not stated

  • Arduinobot

    An open-source 3D printed robot arm powered by ROS 2, designed as a low-cost learning tool for manipulators.

    Robot armIntermediateBuildability 50/100 · Buildable with some effort
    Cost not stated

Robots 49–72 of 182

More to explore