Open-source robots with their licenses, parts and source files. Every page is pinned to a commit on GitHub.
Page 1 of 1 · Ready to build first, then by buildability
OtherA toolkit for cable-driven robots that move objects through the air, built from 3D-printed cable drums on industrial servo motors, made for art installations.
OtherA six-legged hexapod robot built from 3D-printed parts, driven by 18 MG996 servos and controlled by a Raspberry Pi 5 with a Servo2040 board.
OtherAn ultra-low-cost self-balancing robot that can run a neural network to stay balanced and be controlled wirelessly, built for teaching RL, ML, AI and control.
OtherA modular two-wheel self-balancing robot driven by gimbal BLDC motors and the SimpleFOC library.
OtherA small bipedal walking robot controlled by an M5Stack board, with a sliding battery that shifts its balance between legs.
OtherA spherical robot that balances and maneuvers in three degrees of freedom using three orthogonal flywheels and a omnidirectional wheel base.
OtherA small, 3D printed robot that solves a Rubik's cube autonomously on a Raspberry Pi.
OtherA low-cost, easy-to-print biped robot hardware design remixed from the Open Robot Dynamic Initiative Bolt robot, controlled by the Dagor brushless motor control module.
OtherMABEL is an open-source legged balancing robot based on the Boston Dynamics Handle, with articulated legs that can adjust height and balance in multiple axes.
OtherA low-cost, modular open-source soft robotics platform with tendon-driven continuum robots controlled by force-feedback actuators over serial and I2C.
OtherA minimalist underactuated brachiating robot that swings along a horizontal ladder bar using one quasi-direct drive actuator and passive grippers.
OtherA research continuum robot with 4 degrees of freedom that drives two tendons per antagonistic pair with a single servo and measures tendon force with load cells.
OtherA low-cost, small inverted pendulum robot using DengFOC motor driver and SimpleFOC for balance control.
OtherA JavaScript-driven, super-kawaii desktop robot built on the M5Stack platform, with open-source firmware, MODs, and printable cases.
OtherAn open-source AI-powered smart children's electric car designed for parent-child co-creation and maker education.
OtherA family of 18-DOF, 3D-printed hexapod walking robots powered by an ESP32, controlled over WiFi or live pose streaming.
OtherA six-legged hexapod robot with 18 servo joints, controlled from a mobile phone over Bluetooth Low Energy by a Linkit 7697 board.
OtherA low-budget three-servo hexapod robot that walks, dances and avoids obstacles using infrared proximity sensors.
OtherAn open-source adaptive two-finger gripper designed for low-cost, high-performance robotic applications.
OtherA 3D-printed micro-servo hexapod robot controlled by a Raspberry Pi Zero, with an STM32F103 handling leg locomotion and inverse kinematics for its 18 servos.
OtherA 3D-printed bipedal robot built as a low-cost desktop platform for semi-direct drive walking research.
OtherA transformable robot that switches between a spherical rolling mode and a hexapod walking mode.
OtherA 3.5 kg wheeled combat robot with STM32 and Raspberry Pi, designed for robot fighting competitions.
OtherA two-wheeled inverted pendulum robot controlled by a Nucleo board and driven by stepper motors.