Skip to content
RobothecaBeta
Log in

Explore robots

Open-source robots with their licenses, parts and source files. Every page is pinned to a commit on GitHub.

Filters

Type
Level
Buildability

Ready to build: a score of 80 or more, a license and a finished design.

Options
Labels
Origin

Where the project was published, known for 29 of 270 robots. Never guessed.

Guide translated from

Guides machine-translated into English by Robotheca, with a link to the original on each robot page.

37 of 270 robots state a cost. Costs in other currencies are compared using the ECB reference rate of 15 Oct 2026. Robots without a known cost are hidden unless you include them.

Clear filters
Sort:Most buildable
GridList

161 robots of 270

Page 6 of 7 · Ready to build first, then by buildability

  • ONE-Robot

    A self-balancing unicycle robot based on IMU and STM32.

    OtherIntermediateBuildability 30/100 · Incomplete documentation
    • No license
    Cost not stated

  • Robot Nano Hand

    An AI-powered robot hand that can be rebuilt by 3D printing its parts.

    OtherIntermediateBuildability 30/100 · Incomplete documentation
    • Works with AI
    Cost not stated

  • Tensegrity Quadrotor Model

    A mechanical model combining tensegrity structure with a quadrotor drone.

    DroneIntermediateBuildability 30/100 · Incomplete documentation
    • No license
    Cost not stated

  • UniQuad

    A unified and versatile quadrotor platform series designed for UAV research and applications.

    DroneIntermediateBuildability 30/100 · Incomplete documentation
    • No license
    Cost not stated

  • 400mm Quadcopter Model

    A 400mm wheelbase quadcopter drone with full protection, designed for university electronic design competitions.

    DroneIntermediateBuildability 25/100 · Incomplete documentation
    Cost not stated

  • 7-inch Ducted Fan UAV

    A 7-inch ducted fan unmanned aerial vehicle designed for vertical takeoff and landing with a payload capacity of approximately 2 kg.

    DroneIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • Cube Solver

    A compact robot that solves a scrambled 3x3 Rubik's Cube using a STM32F407 microcontroller.

    OtherIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • ElectronBot Voice

    A voice-enabled desktop robot based on the ElectronBot platform, featuring audio input and output capabilities.

    HumanoidIntermediateBuildability 25/100 · Incomplete documentation
    Cost not stated

  • Enterprise E Smart Car

    An open-source omnidirectional smart car designed for the 16th National Intelligent Vehicle Competition, featuring embedded control and PID algorithms.

    Self-driving 1:10IntermediateBuildability 25/100 · Incomplete documentation
    Cost not stated

  • Hand Exoskeleton for Climbing

    A pair of lockable exoskeleton gloves designed to save climbers' energy by locking fingers during climbing.

    Robot armIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • LEAP ROS2

    A low-cost ROS2 robot designed for students and hobbyists to learn robotics and ROS2 development through hands-on assembly and programming.

    OtherIntermediateBuildability 25/100 · Incomplete documentation
    ¥200≈ €27 (ECB rate, 15 Oct 2026)

  • Little Doggy Run

    An open-source quadruped robot designed for walking and running, featuring a five-bar linkage leg mechanism.

    QuadrupedIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • MiniRover

    An open-source Mars rover robot with ESP32-based electronics and Arduino firmware for remote control and sensor integration.

    WheeledIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • Moco-8

    An open-source 8-degree-of-freedom quadruped robot platform with full hardware and software documentation.

    QuadrupedIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • My Balance Car

    A self-balancing robot car built with STM32F103C8T6, MPU6050, MX1508, ESP8266, and OLED.

    WheeledIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • Otto DIY Humanoid Robot

    An open-source humanoid robot designed for learning and AI integration, featuring assembly guides and firmware documentation.

    HumanoidIntermediateBuildability 25/100 · Incomplete documentation
    • Works with AI
    Cost not stated

  • PID Self-Balancing Car

    A self-balancing robot car that uses PID control and features ultrasonic obstacle avoidance, ultrasonic following, and Bluetooth remote control.

    WheeledIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • Py-Apple Controller

    An open-source quadruped robot controller based on ESP32, designed to support the Py-Apple Dynamics software suite for controlling quadruped robots.

    QuadrupedIntermediateBuildability 25/100 · Incomplete documentation
    Cost not stated

  • Robot BenBen

    A bipedal walking robot project based on the STM32F103C8T6 microcontroller.

    HumanoidIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • Uni Wr2

    A two-wheeled differential-drive robot using ROS Noetic for SLAM navigation with Gmapping, Hector, and Cartographer.

    WheeledIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • UR5-like Robotic Arm

    A replica robotic arm based on the UR5 structure, featuring stepper motors, closed-loop control, and an Android app for interaction.

    Robot armIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • WALL-E Desktop Robot

    A desktop-scale WALL-E robot project with 3D-printable parts and CAD files.

    HumanoidIntermediateBuildability 25/100 · Incomplete documentation
    • No license
    Cost not stated

  • KunPeng

    KunPeng is a dual-rotor drone that can achieve stable hovering at a fixed point and altitude.

    DroneIntermediateBuildability 20/100 · Incomplete documentation
    • No license
    Cost not stated

  • pib

    A repository of 3D printable STL parts for the pib robot, currently including C-Arm components.

    HumanoidIntermediateBuildability 20/100 · Incomplete documentation
    Cost not stated

Robots 121–144 of 161

More to explore