Hyun

A wheeled-legged robot controlled by an ESP32, featuring an MPU6050 gyroscope, PM3510 brushless motors, and SimpleFOC drivers.

3D preview converted from github.com/HuGuoXuang/Hyun at c9ce1d1, under MIT. View the original files from GitHub (1.7 MB) (opens in a new tab)

What it can do

Written by Robotheca from the project's documents.

This repository has no parts list Robotheca can read yet.

The creator's steps, each with its instructions.

The guide appears here as you scroll.

Guide by @HuGuoXuang (README.md), under MIT. The English translation is by Robotheca, shared under the same license.

Notes written by Robotheca from the project's documents.

Incomplete documentation

How complete the published files are for rebuilding this robot, measured by Robotheca at commit c9ce1d1. It isn't a rating of the robot.

3D and CAD files10/20
14 printable parts (STL, 3MF).
Add the CAD source (STEP, or the CAD program's own files) so people can change the design.
Robot description0/15
No URDF.
Add a URDF: the robot can then be seen in 3D and tried in the browser.
Parts list0/20
No parts list in the repository or linked.
Most points to gain: Link to your parts list, or add it to the repository (a CSV or a Markdown table) with quantities, prices and where to buy each part.
Software15/15
Code in this repository, instructions to install or run it, built on arduino.
Documentation10/15
README of 241 characters with 6 pictures; 10 build steps.
Write a README of at least 1,500 characters: what the robot does and how to build it.
Simulation0/5
No simulation files.
Add a simulation model (MuJoCo, Gazebo, Webots or Isaac).
Licenses10/10
Hardware: MIT; software: MIT.

Written by Robotheca from the project's documents.

Robotheca doesn't review code. Read it before running it.

Every file of the project: code, CAD, electronics, guides, at commit c9ce1d1.

Questions and improvements go to the creator's repository.