Tensegrity Quadrotor Model

A mechanical model combining tensegrity structure with a quadrotor drone.

Drone
No license: all rights reserved by the creator
3D printable

Suggested by Robotheca, created by @helloliver (opens in a new tab), from github.com/helloliver/tensegrity-quadrotor-model (opens in a new tab). Pinned to commit 71aab14 (opens in a new tab).

Fork Download

Hardware license: No license
Software license: No license
Commercial use: Unknown

No license is stated for part of this robot.

The creator chose the hardware and software licenses on Robotheca; the repository has no license file for them yet.

Its license doesn't let Robotheca show its photos.

See the photos on GitHub

3D model loaded from the original files on GitHub at 71aab14, under NONE. View the original files from GitHub (1.2 MB) (opens in a new tab)

Bill of materials

This repository has no parts list Robotheca can read yet.

Build guide

The creator's steps, each with its instructions.

1Tensegrity Assembly
2Quadrotor Core Assembly
3Tensegrity Quadrotor Assembly

The creator's guide is written in Chinese. It has no license, so all rights stay with the creator: Robotheca doesn't show it here or translate it, and gives its own notes about the robot instead.

Read the creator's guide Ask the creator on GitHub

Project information

Difficulty: Intermediate
Estimated cost: Not stated
Buildability: 30/100Incomplete documentation
Parts: –
Tools: 3D printer

Buildability30/100

Incomplete documentation

How complete the published files are for rebuilding this robot, measured by Robotheca at commit 71aab14. It isn't a rating of the robot.

3D and CAD files20/20
6 printable parts (STL, 3MF), 58 CAD source files.
Robot description0/15
No URDF.
Add a URDF: the robot can then be seen in 3D and tried in the browser.
Parts list0/20
No parts list in the repository or linked.
Most points to gain: Link to your parts list, or add it to the repository (a CSV or a Markdown table) with quantities, prices and where to buy each part.
Software0/15
No code in this repository or linked.
Link to your code, or add it to this repository. Explain in the README how to install and run the software. Say which software framework it uses (ROS 2, LeRobot, Arduino…).
Documentation10/15
README of 333 characters with 12 pictures; 3 build steps.
Write a README of at least 1,500 characters: what the robot does and how to build it.
Simulation0/5
No simulation files.
Add a simulation model (MuJoCo, Gazebo, Webots or Isaac).
Licenses0/10
Hardware: no license; software: no license.
Add a license for the hardware (e.g. CERN-OHL-S-2.0 or CC-BY-SA-4.0). Add a license for the software (e.g. MIT or Apache-2.0).

Software

Framework: Not stated
License: NONE

Robotheca doesn't review code. Read it before running it.

Project files

Every file of the project: code, CAD, electronics, guides, at commit 71aab14.

Community

Questions and improvements go to the creator's repository.

Photo and 3D model

Bill of materials

Build guide