KunPeng
KunPeng is a dual-rotor drone that can achieve stable hovering at a fixed point and altitude.
- Drone
- No license: all rights reserved by the creator
- arduino
- 3D printable
Suggested by Robotheca, created by @HuGuoXuang (opens in a new tab), from github.com/HuGuoXuang/KunPeng (opens in a new tab). Pinned to commit 182a5e7 (opens in a new tab).
- Hardware license
- No license
- Software license
- No license
- Commercial use
- Unknown
No license is stated for part of this robot.
The creator chose the hardware and software licenses on Robotheca; the repository has no license file for them yet.
Photo and 3D model
3D model loaded from the original files on GitHub at 182a5e7, under NONE. View the original files from GitHub (7.2 MB) (opens in a new tab)
What it can do
Written by Robotheca from the project's documents.
- Hovers at a fixed position and altitude
- Uses two ESP32 chips as flight controllers
Bill of materials
This repository has no parts list Robotheca can read yet.
Build guide
The creator's guide is written in Chinese. It has no license, so all rights stay with the creator: Robotheca doesn't show it here or translate it, and gives its own notes about the robot instead.
Read the creator's guideAsk the creator on GitHub (opens in a new tab)Wiring and electronics
Notes written by Robotheca from the project's documents.
Main parts
- Two ESP32 flight control boards
- ICM42688 inertial measurement unit
- Barometric pressure sensor
- LED indicator board