BCN3D Moveo
An open-source, 3D-printed robotic arm designed for educational use and low-cost reproduction.
- Robot arm
- Open source
- arduino
- 3D printable
Suggested by Robotheca, created by @BCN3D (opens in a new tab), from github.com/BCN3D/BCN3D-Moveo (opens in a new tab). Pinned to commit 0866a92 (opens in a new tab).
- Hardware license
- MIT (opens in a new tab)
- Software license
- MIT (opens in a new tab)
- Commercial use
- Allowed
Photo and 3D model
This repository has no photo of the robot yet.
3D preview converted from github.com/BCN3D/BCN3D-Moveo at 0866a92, under MIT. View the original files from GitHub (84.6 MB) (opens in a new tab)
What it can do
Written by Robotheca from the project's documents.
- A 3D-printed robotic arm (Moveo) intended for educational use, controlled with the Arduino software ecosystem.
- Designed as a low-cost, modifiable robotic arm for training in mechanical design, automation and industrial programming.
- Can be assembled, fine-tuned and used following the assembly and firmware upload manuals in the repository.
Bill of materials
This repository has no parts list Robotheca can read yet.
Build guide
The guide appears here as you scroll.
Guide by @BCN3D (README.md), under MIT.
Wiring and electronics
Notes written by Robotheca from the project's documents.
Main parts
- Arduino-based electronics controlling the arm.
- Firmware written in Arduino, C and C++ sources in the FIRMWARE folder.
Connections
- The documents do not describe how the electronic parts are connected.