← BCN3D Moveo
Project files
- 1M1B.SLDPRT1.2 MB
- 1M2A.SLDPRT997 KB
- 1M3.SLDASM495 KB
- 1M3A.SLDPRT721 KB
- 2.SLDASM3.6 MB
- 2M1 assembly.SLDASM3.0 MB
- 2M1D.SLDPRT1.3 MB
- 2M2 assembly.SLDASM553 KB
- 2M2.SLDASM598 KB
- 2M2HA.SLDPRT1.6 MB
- 2M2M assembly.SLDASM327 KB
- 2M2MA.SLDPRT1.7 MB
- 3M1.SLDASM2.9 MB
- 3M1D.SLDPRT4.8 MB
- 3M2.SLDASM6.3 MB
- 3M2C.SLDPRT1.1 MB
- 3M2CC.SLDPRT2.1 MB
- 4M.SLDASM6.0 MB
- 4M1D.SLDPRT1.5 MB
- 4M2.SLDASM436 KB
- 4M2B.SLDPRT710 KB
- 4M2CB.SLDPRT1.0 MB
- 8mm Bearing.SLDPRT949 KB
- Arandela.SLDPRT109 KB
- Barra llisa 8mm x 80mm.SLDPRT118 KB
- Base assembly.SLDASM886 KB
- Base fusta.SLDPRT225 KB
- BCN3D Moveo assembly.SLDASM10.9 MB
- Bearing 3Bore 10Ext 4Height.SLDPRT260 KB
- Bearing 4Bore 13Ext 5.SLDPRT257 KB
- Bearing 5mm.SLDPRT737 KB
- Bottom Plate C.SLDPRT839 KB
- Box Assembly B.SLDASM677 KB
- Box C.SLDPRT1.2 MB
- Brass insert M3.SLDPRT1.4 MB
- Brass insert M4.SLDPRT1.7 MB
- Capacitor 1.SLDPRT114 KB
- Capacitor 2.SLDPRT115 KB
- Chip.SLDPRT100 KB
- Cilinder.SLDPRT117 KB
- Coupling 5 to 8 mm.SLDPRT662 KB
- Driver.SLDASM315 KB
- Drivers Support Assembly B.SLDASM423 KB
- Fan Module.SLDPRT467 KB
- Fan.SLDPRT213 KB
- Gripper B Assembly.SLDASM4.2 MB
- Gripper Left B.SLDPRT481 KB
- Gripper Right B.SLDPRT484 KB
- Idol Gear B.SLDPRT878 KB
- M1 Tensor D.SLDASM280 KB
- M3 Nut.SLDPRT205 KB
- M3x10.SLDPRT179 KB
- M3x12.SLDPRT187 KB
- M3x16.SLDPRT172 KB
- M3x20.SLDPRT160 KB
- M3x25.SLDPRT159 KB
- M3x35.SLDPRT159 KB
- M3x40.SLDPRT153 KB
- M3x8.SLDPRT184 KB
- M4 Locknut.SLDPRT252 KB
- M4 Nut.SLDPRT192 KB
- M4x16.SLDPRT165 KB
- M4x20.SLDPRT174 KB
- M4x30.SLDPRT154 KB
- M4x40.SLDPRT150 KB
- M4x45.SLDPRT150 KB
- M5 Lock.SLDPRT319 KB
- M5x15.SLDPRT142 KB
- M5x20.SLDPRT147 KB
- M5x30.SLDPRT135 KB
- M8 Autoblocant.SLDPRT208 KB
- M8x65.SLDPRT142 KB
- Module Fan Assembly.SLDASM259 KB
- Nema 14.SLDPRT1.0 MB
- Nema 17 Curt.SLDPRT1.3 MB
- Nema 17 Llarg.SLDPRT1.4 MB
- Nema 17 Reductor.SLDPRT1.6 MB
- Nema 23.SLDPRT1.0 MB
- PCB TB6560.SLDPRT393 KB
- Pivot Arm B.SLDPRT202 KB
- Potes base B.SLDPRT250 KB
- Pulley 8mm IGNIS.SLDPRT515 KB
- Pulley M5.SLDPRT240 KB
- Rotary Plate.SLDASM1.2 MB
- Servo Futaba S3003.SLDPRT7.1 MB
- Servo Gear B.SLDPRT899 KB
- Sink.SLDPRT402 KB
- Sistema rodaments.SLDASM438 KB
- Smooth bar 8mm x 121mm.SLDPRT95 KB
- Smooth bar 8mm x 140mm.SLDPRT95 KB
- Smooth bar 8mm x 50mm.SLDPRT99 KB
- Spacer M5x10.SLDPRT126 KB
- Spacer M8x20.SLDPRT123 KB
- Suport Drivers E.SLDPRT466 KB
- T2M1BD.SLDPRT431 KB
- T2M1BI.SLDPRT456 KB
- T3M1.SLDASM296 KB
- T3M1C.SLDPRT429 KB
- T4M1E.SLDPRT851 KB
- Tapa 2M1C.SLDPRT220 KB
- Tapa 3M1C.SLDPRT200 KB
- Tapa 4M1D.SLDPRT211 KB
- TBC.SLDPRT222 KB
- Tensor D.SLDASM326 KB
- Tensor I.SLDASM308 KB
- Terminal.SLDPRT207 KB
- Top Plate C.SLDPRT542 KB
- Volandera M3.SLDPRT104 KB
- Volandera M4.SLDPRT104 KB
- Volandera M5.SLDPRT107 KB
Files by @BCN3D, at commit 0866a92, read from GitHub in your browser. Hardware license: MIT; software license: MIT. Robotheca doesn't review code: read it before running it.