Two-wheel RC smart car

A two-wheel remote-control smart car: schematic, circuit board pictures, program, soldering tutorial, manual and how it works.

No license is stated for part of this robot.

The creator chose the hardware and software licenses on Robotheca; the repository has no license file for them yet.

This repository contains executable files that Robotheca doesn't check. Only run them if you trust the creator.

Which files (1 firmware image)

Its license doesn't let Robotheca show its photos.

Bill of materials

This repository has no parts list Robotheca can read yet.

This repository has no build guide Robotheca can read yet.

Incomplete documentation

How complete the published files are for rebuilding this robot, measured by Robotheca at commit 6dee2ee. It isn't a rating of the robot.

3D and CAD files10/20
1 printable part (STL, 3MF).
Add the CAD source (STEP, or the CAD program's own files) so people can change the design.
Robot description0/15
No URDF.
Add a URDF: the robot can then be seen in 3D and tried in the browser.
Parts list0/20
No parts list in the repository or linked.
Most points to gain: Link to your parts list, or add it to the repository (a CSV or a Markdown table) with quantities, prices and where to buy each part.
Software5/15
Code in this repository. The documents have not been read yet.
Say which software framework it uses (ROS 2, LeRobot, Arduino…).
Documentation0/15
No README; 0 build steps.
Write a README of at least 1,500 characters: what the robot does and how to build it. Split the build into at least 3 steps. Show the robot and its assembly in pictures in the README.
Simulation0/5
No simulation files.
Add a simulation model (MuJoCo, Gazebo, Webots or Isaac).
Licenses0/10
Hardware: no license; software: no license.
Add a license for the hardware (e.g. CERN-OHL-S-2.0 or CC-BY-SA-4.0). Add a license for the software (e.g. MIT or Apache-2.0).

Robotheca doesn't review code. Read it before running it.

Every file of the project: code, CAD, electronics, guides, at commit 6dee2ee.

Questions and improvements go to the creator's repository.