HyperCar

An all-in-one car for electronics design contests and Huawei's hardware challenge: schematics (core, power, charger, peripherals) and circuit board, as an Altium project.

Self-driving 1:10
No license: all rights reserved by the creator

Suggested by Robotheca, created by @Liu-Curiousity (opens in a new tab), from github.com/Liu-Curiousity/HyperCar (opens in a new tab). Pinned to commit c87bc7f (opens in a new tab).

Fork Download

Hardware license: No license
Software license: No license
Commercial use: Unknown

No license is stated for part of this robot.

The creator chose the hardware and software licenses on Robotheca; the repository has no license file for them yet.

This repository has no photo of the robot yet.

Bill of materials

This repository has no parts list Robotheca can read yet.

Build guide

This repository has no build guide Robotheca can read yet.

Wiring and electronics

Schematics, boards and diagrams

Project information

Difficulty: Advanced
Estimated cost: Not stated
Buildability: 0/100Incomplete documentation
Parts: –

Buildability0/100

Incomplete documentation

How complete the published files are for rebuilding this robot, measured by Robotheca at commit c87bc7f. It isn't a rating of the robot.

3D and CAD files0/20
No printable parts or CAD files.
Most points to gain: Add the parts to print (STL or 3MF files). Add the CAD source (STEP, or the CAD program's own files) so people can change the design.
Robot description0/15
No URDF.
Add a URDF: the robot can then be seen in 3D and tried in the browser.
Parts list0/20
No parts list in the repository or linked.
Link to your parts list, or add it to the repository (a CSV or a Markdown table) with quantities, prices and where to buy each part.
Software0/15
No code in this repository or linked. The documents have not been read yet.
Link to your code, or add it to this repository. Say which software framework it uses (ROS 2, LeRobot, Arduino…).
Documentation0/15
No README; 0 build steps.
Write a README of at least 1,500 characters: what the robot does and how to build it. Split the build into at least 3 steps. Show the robot and its assembly in pictures in the README.
Simulation0/5
No simulation files.
Add a simulation model (MuJoCo, Gazebo, Webots or Isaac).
Licenses0/10
Hardware: no license; software: no license.
Add a license for the hardware (e.g. CERN-OHL-S-2.0 or CC-BY-SA-4.0). Add a license for the software (e.g. MIT or Apache-2.0).

Software

Framework: Not stated
License: NONE

Robotheca doesn't review code. Read it before running it.

Project files

Every file of the project: code, CAD, electronics, guides, at commit c87bc7f.

Community

Questions and improvements go to the creator's repository.

Photo

Bill of materials

Build guide

Wiring and electronics

Schematics, boards and diagrams