Hoverboard

A self-balancing hoverboard project that includes STM32 firmware and PCB designs.

Wheeled
No license: all rights reserved by the creator

Suggested by Robotheca, created by @EPIPsunny (opens in a new tab), from github.com/EPIPsunny/Hoverboard (opens in a new tab). Pinned to commit 05fb5b3 (opens in a new tab).

Fork Download

Hardware license: No license
Software license: No license
Commercial use: Unknown

No license is stated for part of this robot.

The creator chose the hardware and software licenses on Robotheca; the repository has no license file for them yet.

This repository contains executable files that Robotheca doesn't check. Only run them if you trust the creator.

Which files (1 script, 1 firmware image)

This repository has no photo of the robot yet.

What it can do

Written by Robotheca from the project's documents.

Project described as a self-balancing vehicle (平衡车) with STM32 firmware.

Bill of materials

This repository has no parts list Robotheca can read yet.

Build guide

The creator's guide is in the repository. It has no license, so all rights stay with the creator: Robotheca doesn't show it here or translate it, and gives its own notes about the robot instead.

Read the creator's guide Ask the creator on GitHub

Wiring and electronics

Notes written by Robotheca from the project's documents.

Main parts

STM32 microcontroller (firmware built on STM32F10x standard peripheral library).
Custom PCB designed in Altium (pcb/平衡车.SchDoc and PcbDoc).

Connections

Schematic and PCB layout are provided in Altium files; the README gives no detail on specific connections.

Schematics, boards and diagrams

Project information

Difficulty: Intermediate
Estimated cost: Not stated
Buildability: 10/100Incomplete documentation
Parts: –

Buildability10/100

Incomplete documentation

How complete the published files are for rebuilding this robot, measured by Robotheca at commit 05fb5b3. It isn't a rating of the robot.

3D and CAD files0/20
No printable parts or CAD files.
Most points to gain: Add the parts to print (STL or 3MF files). Add the CAD source (STEP, or the CAD program's own files) so people can change the design.
Robot description0/15
No URDF.
Add a URDF: the robot can then be seen in 3D and tried in the browser.
Parts list0/20
No parts list in the repository or linked.
Link to your parts list, or add it to the repository (a CSV or a Markdown table) with quantities, prices and where to buy each part.
Software10/15
Code in this repository, instructions to install or run it.
Say which software framework it uses (ROS 2, LeRobot, Arduino…).
Documentation0/15
README of 32 characters with 0 pictures; 0 build steps.
Write a README of at least 1,500 characters: what the robot does and how to build it. Split the build into at least 3 steps. Show the robot and its assembly in pictures in the README.
Simulation0/5
No simulation files.
Add a simulation model (MuJoCo, Gazebo, Webots or Isaac).
Licenses0/10
Hardware: no license; software: no license.
Add a license for the hardware (e.g. CERN-OHL-S-2.0 or CC-BY-SA-4.0). Add a license for the software (e.g. MIT or Apache-2.0).

Software

Framework: Not stated
Languages: C, Assembly
License: NONE

The code

How to run it

Written by Robotheca from the project's documents.

Code is located in the 平衡车代码 folder, with STM32 firmware sources; the README does not describe build or flashing steps.

Robotheca doesn't review code. Read it before running it.

Project files

Every file of the project: code, CAD, electronics, guides, at commit 05fb5b3.

Community

Questions and improvements go to the creator's repository.

Photo