ElectronBot Peripheral
A collection of 3D-printable accessories and decorations for the ElectronBot robot.
- Other
- No license: all rights reserved by the creator
- 3D printable
Suggested by Robotheca, created by @maker-community (opens in a new tab), from github.com/maker-community/ElectronBot-Peripheral (opens in a new tab). Pinned to commit 2f545c8 (opens in a new tab).
- Hardware license
- No license
- Software license
- No license
- Commercial use
- Unknown
No license is stated for part of this robot.
The creator chose the hardware and software licenses on Robotheca; the repository has no license file for them yet.
Photo and 3D model
3D model loaded from the original files on GitHub at 2f545c8, under NONE. View the original files from GitHub (15.2 MB) (opens in a new tab)
What it can do
Written by Robotheca from the project's documents.
- Moves arms and head like a humanoid robot
- Plays audio through built-in speaker
- Displays facial expressions on a screen
- Supports multiple 3D-printed accessories for customization
Bill of materials
This repository has no parts list Robotheca can read yet.
Build guide
The creator's steps, each with its instructions.
- 1Prepare 3D-printed parts
- 2Assemble accessories using glue or screws
- 3Attach accessories to the ElectronBot base model
The creator's guide is written in Chinese. It has no license, so all rights stay with the creator: Robotheca doesn't show it here or translate it, and gives its own notes about the robot instead.
Read the creator's guideAsk the creator on GitHub (opens in a new tab)More guides
Wiring and electronics
Notes written by Robotheca from the project's documents.
Main parts
- ESP32 microcontroller
- Servo motors for head and arms
- I2S audio amplifier and speaker
- OLED or LCD screen for face display
- Power switch and battery connector
Connections
- Servos connected to ESP32 PWM pins
- I2S amplifier wired to ESP32 for audio output
- Screen connected via I2C or SPI bus
- Power switch in series with battery input