Project files

id: assembly title: Assembly Tutorial sidebar_position: 4

import useBaseUrl from '@docusaurus/useBaseUrl';

export const ImgWithBaseUrl = ({src, alt, width}) => (

);

Assembly Tutorial

2. Installing the Base Frame

Preparation

Before starting the assembly, please ensure that you have:

1. Prepared all the necessary components (refer to the Bill of Materials)
2. Prepared the required tools (diagonal pliers, M2 screwdriver)
3. A clean workbench

Assembly Steps

1. Material Preparation

1. Check that all 3D-printed parts are complete
2. Remove support material from the printed parts
3. Ensure all holes are clear

2. Updates coming soon... The overall installation is similar to the original version; you can search for "ElectronBot" on Bilibili for many installation videos.

Precautions

• Handle components carefully during assembly to avoid damage
• Ensure all screws are tightened but do not over-tighten
• Pay attention to the installation direction of the servos

FAQ

1. Servo motor not rotating

   • Restart the device
   • Check if the wiring is correct
   • Confirm that the power supply is normal
   • Verify if the program is correctly flashed

2. Unstable structure

   • Check if the screws are tightened
   • Confirm if the 3D printed parts are deformed

Next Steps

After completing the assembly, please refer to the Usage Instructions page to learn how to start using your robot.

If you encounter any issues, please check our FAQ or contact technical support.