← Barkour Robot
Project files
- 10pin_10pin.png196 KB
- ada_separator.png689 KB
- ak80_9.png221 KB
- complete_assembly.jpg425 KB
- encoder_cables.png615 KB
- encoder_cables2.png617 KB
- encoder_cables3.png570 KB
- encoder_cables4.png661 KB
- gebru_board.png484 KB
- gebru_cortes_motor.jpg494 KB
- gebru_cortes.png215 KB
- gebru_cortes2.png572 KB
- glue_thermistor.jpg224 KB
- install_assembly.jpg425 KB
- jlink_10pin.png166 KB
- jlink_debugger.png376 KB
- mataric_board.png482 KB
- monomotor_full_subassembly.jpg633 KB
- motor_and_gebru.png411 KB
- motor_and_separator.jpg661 KB
- motor_flashing_parts.jpg1.5 MB
- motor_flashing.png292 KB
- motor_parts.png303 KB
- phase_leads_capacitor_precaution.jpg912 KB
- plug_in_ada.jpg585 KB
- remove_cover.png243 KB
- ribbon_mataric_back.png202 KB
- ribbon_mataric.png294 KB
- single_motor_setup.jpg1.6 MB
- staging_heat_sink.jpg353 KB
- thermal_pad.jpg464 KB
- thermistor.jpg85 KB
- USB_A_B.png245 KB
Files by @google-deepmind, at commit e7c0f6f, read from GitHub in your browser. Hardware license: Apache-2.0; software license: Apache-2.0. Robotheca doesn't review code: read it before running it.