← Barkour Robot
Project files
- anchor_outbound_STO.jpg147 KB
- antenna_cover.jpg72 KB
- antenna_left.jpg204 KB
- antenna_right.jpg176 KB
- DFB_cabling.png1.5 MB
- DFB_power_leads.jpg140 KB
- fan1.jpg102 KB
- fan2.jpg101 KB
- fan3.jpg97 KB
- fan4.jpg102 KB
- fans_into_Rus.jpg137 KB
- finalized_outbound_STO.jpg160 KB
- heat_sink_zip_ties.jpg149 KB
- hopper_only.jpg1.5 MB
- hopper_STO_behind_NUC.jpg162 KB
- hopper_STO_out.jpg565 KB
- imu_locknuts.jpg91 KB
- imu_to_dfb_base.jpg129 KB
- nuc_antenna1.jpg138 KB
- nuc_antenna2.jpg1.5 MB
- nuc_eth_adaptor.jpg2.1 MB
- NUC_Eth_to_Rus_STO.jpg227 KB
- nuc_to_imu.png756 KB
- nuc_to_rus_power_route.jpg845 KB
- outbound_STO_across_NUC.jpg1.4 MB
- panel_is_mounted.jpg126 KB
- power_button.jpg97 KB
- power_leads_block.jpg99 KB
- prep_install_NUC.jpg1.6 MB
- prep_NUC_Rus_cable.jpg1.4 MB
- pwr_button_to_NUC.jpg172 KB
- robot_tether_installed.jpg1.2 MB
- Rus_FeiFei_cable.jpg235 KB
- Rus_port_alignment_top.jpg79 KB
- Rus_power_cable.jpg180 KB
- RUS_STO_Loop_DFB_14A.jpg1.8 MB
- Rus_STO_outbound.jpg178 KB
- Rus_three_points_contact.jpg134 KB
- RusPWRIn_cable.jpg131 KB
- STO_across_Rus_heatsink.jpg171 KB
- sto_antenna.jpg117 KB
- STO_button_Rus.jpg179 KB
- usb_c_a_into_NUC1.jpg153 KB
- usb_eth_adaptor.jpg186 KB
- usb_panel_mount.png1.6 MB
- XB_plugged_in.jpg1.6 MB
Files by @google-deepmind, at commit e7c0f6f, read from GitHub in your browser. Hardware license: Apache-2.0; software license: Apache-2.0. Robotheca doesn't review code: read it before running it.