← SpotMicro ESP32
Project files
- Bottom_Cover (Template).stl133 KB
- Bottom_Cover_Split_Front.stl85 KB
- Bottom_Cover_Split_Rear.stl100 KB
- Bottom_Shoulder.stl107 KB
- cameramount_esp32_cam_counterpiece.stl50 KB
- cameramount_esp32_cam.stl83 KB
- Cameramount.stl166 KB
- Chassis_Side.stl88 KB
- Circuitry_Mountingplate (Template).stl122 KB
- Circuitry_Mountingplate_Arduino.stl457 KB
- Circuitry_Mountingplate_SZBK07_Extended.stl382 KB
- Circuitry_Mountingplate_SZBK07.stl355 KB
- Circuitry_Mountingplate_XL4016_Extended.stl372 KB
- Circuitry_Mountingplate_XL4016.stl345 KB
- Foot_Tip.stl515 KB
- Front_Cover_Optimized.stl145 KB
- Front_Cover.stl92 KB
- Inner_Shoulder.stl140 KB
- Limb_Ball_Bearing_Mount_long_v4.stl130 KB
- Limb_Ball_Bearing_Mount.stl134 KB
- Limb_Basebody (Template).stl153 KB
- Limb_Bottom_Shell.stl223 KB
- Limb_Servohorn_Mount_long_v4.stl171 KB
- Limb_Servohorn_Mount.stl180 KB
- Limb_Top_Shell.stl281 KB
- LiPo_Mountingbracket_Front.stl44 KB
- LiPo_Mountingbracket_Middle.stl40 KB
- LiPo_Mountingbracket_Rear.stl64 KB
- Outer_Shoulder.stl189 KB
- Rear_Cover (Template).stl95 KB
- Rear_Cover_1_77_tft_without_SD.stl145 KB
- Rear_Cover_long_1_77_tft_without_SD.stl150 KB
- Rear_Cover_long_1_8_tft_with_SD.stl185 KB
- Rear_Cover_Plate_Template.stl195 KB
- Rear_Cover_Plate.stl373 KB
- Rear_Cover_Shell_Long.stl426 KB
- sensormount_esp32_cam.stl108 KB
- Sensormount.stl136 KB
- Servohorn_6_B_Star.stl316 KB
- Shoulder_Joint_Ball_Bearing_Pin.stl15 KB
- Shoulder_Joint_Servohorn_Cap.stl143 KB
- Shoulder_Joint_Servomount.stl147 KB
- Top_Cover (Template).stl145 KB
- Top_Cover_Split_Front.stl421 KB
- Top_Cover_Split_Rear_with_OLED.stl600 KB
- Top_Cover_Split_Rear.stl112 KB
- Top_Shoulder.stl110 KB
- TTL_Counterpiece.stl25 KB
- Wrist _Counterpart.stl77 KB
- Wrist.stl113 KB
Files by @michaelkubina, at commit 2f10e14, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.