Project files

Bottom_Cover (Template).png18 KB
Bottom_Cover_Split_Front.png12 KB
Bottom_Cover_Split_Rear.png11 KB
Bottom_Shoulder.png13 KB
cameramount_esp32_cam_counterpiece.png16 KB
cameramount_esp32_cam.png22 KB
Cameramount.png22 KB
Chassis_Side.png7 KB
Circuitboard_Mount (Template).png17 KB
Circuitry_Mountingplate (Template).png15 KB
Circuitry_Mountingplate_SZBK07_Extended.png15 KB
Circuitry_Mountingplate_SZBK07.png20 KB
Circuitry_Mountingplate_XL4016_Extended.png16 KB
Circuitry_Mountingplate_XL4016.png20 KB
Foot_Tip.png29 KB
Front_Cover_Optimized.png19 KB
Front_Cover.png18 KB
Inner_Shoulder.png11 KB
Limb_Ball_Bearing_Mount_long_v4.png15 KB
Limb_Ball_Bearing_Mount.png15 KB
Limb_Basebody (Template).png17 KB
Limb_Bottom_Shell.png19 KB
Limb_Servohorn_Mount_long_v4.png16 KB
Limb_Servohorn_Mount.png18 KB
Limb_Top_Shell.png18 KB
LiPo_Mountingbracket_Front.png15 KB
LiPo_Mountingbracket_Middle.png12 KB
LiPo_Mountingbracket_Rear.png16 KB
Outer_Shoulder.png13 KB
Rear_Cover (Template).png21 KB
Rear_Cover_1_77_tft_without_SD.png22 KB
Rear_Cover_long_1_77_tft_without_SD.png21 KB
Rear_Cover_long_1_8_tft_with_SD.png22 KB
Rear_Cover_Plate_Template.png15 KB
Rear_Cover_Plate.png17 KB
Rear_Cover_Shell_Long.png21 KB
sensormount_esp32_cam.png21 KB
Sensormount.png18 KB
Servohorn_6_B_Star.png12 KB
Shoulder_Joint_Ball_Bearing_Pin.png7 KB
Shoulder_Joint_Servohorn_Cap.png12 KB
Shoulder_Joint_Servomount.png15 KB
Top_Cover (Template).png16 KB
Top_Cover_Split_Front.png10 KB
Top_Cover_Split_Rear_with_OLED.png14 KB
Top_Cover_Split_Rear.png14 KB
Top_Shoulder.png13 KB
TTL_Counterpiece.png13 KB
Wrist _Counterpart.png9 KB
Wrist.png9 KB

Files by @michaelkubina, at commit 2f10e14, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.