← SpotMicro ESP32
Project files
- Bottom_Cover (Template).FCStd501 KB
- Bottom_Cover_Split_Front.FCStd1.0 MB
- Bottom_Cover_Split_Rear.FCStd1.0 MB
- Bottom_Shoulder.FCStd130 KB
- cameramount_esp32_cam_counterpiece.FCStd135 KB
- cameramount_esp32_cam.FCStd650 KB
- Cameramount.FCStd484 KB
- Chassis_Side.FCStd104 KB
- Circuitboard_Mount (Template).FCStd51 KB
- Circuitry_Mountingplate (Template).FCStd411 KB
- Circuitry_Mountingplate_Arduino.FCStd165 KB
- Circuitry_Mountingplate_Arduino.FCStd1158 KB
- Circuitry_Mountingplate_Extended.FCStd1.7 MB
- Circuitry_Mountingplate_SZBK07_Extended.FCStd1.7 MB
- Circuitry_Mountingplate_SZBK07.FCStd1.7 MB
- Circuitry_Mountingplate.FCStd1.7 MB
- Foot_Tip.FCStd3.7 MB
- Front_Cover_Optimized.FCStd1.2 MB
- Front_Cover.FCStd623 KB
- Inner_Shoulder.FCStd174 KB
- Limb_Ball_Bearing_Mount_long_v4.FCStd218 KB
- Limb_Ball_Bearing_Mount.FCStd218 KB
- Limb_Basebody (Template).FCStd729 KB
- Limb_Bottom_Shell.FCStd2.3 MB
- Limb_Servohorn_Mount_long_v4.FCStd623 KB
- Limb_Servohorn_Mount.FCStd723 KB
- Limb_Top_Shell.FCStd3.1 MB
- LiPo_Mountingbracket_Front.FCStd60 KB
- LiPo_Mountingbracket_Middle.FCStd44 KB
- LiPo_Mountingbracket_Rear.FCStd201 KB
- Outer_Shoulder.FCStd142 KB
- Rear_Cover (Template).FCStd1.4 MB
- Rear_Cover_1_77_tft_without_SD.FCStd2.7 MB
- Rear_Cover_long_1_77_tft_without_SD.FCStd2.3 MB
- Rear_Cover_long_1_8_tft_with_SD.FCStd2.6 MB
- Rear_Cover_Plate_Template.FCStd1.3 MB
- Rear_Cover_Plate.FCStd2.2 MB
- Rear_Cover_Shell_Long.FCStd1.9 MB
- sensormount_esp32_cam.FCStd375 KB
- Sensormount.FCStd409 KB
- Servohorn_6_B_Star.FCStd153 KB
- Servohorn_6_B_Star.FCStd1155 KB
- Shoulder_Joint_Ball_Bearing_Pin.FCStd12 KB
- Shoulder_Joint_Servohorn_Cap.FCStd122 KB
- Shoulder_Joint_Servomount.FCStd374 KB
- Top_Cover (Template).FCStd693 KB
- Top_Cover_Split_Front.FCStd1.5 MB
- Top_Cover_Split_Rear_with_OLED.FCStd1.2 MB
- Top_Cover_Split_Rear.FCStd1.4 MB
- Top_Shoulder.FCStd157 KB
- TTL_Counterpiece.FCStd59 KB
- Wrist _Counterpart.FCStd176 KB
- Wrist.FCStd1.1 MB
Files by @michaelkubina, at commit 2f10e14, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.