← PAROL6
Project files
- 19mm ESTOP.png55 KB
- AXK3552 needle bearing.png66 KB
- barewire1.png3.3 MB
- barewire2.png3.3 MB
- barewire3.png3.6 MB
- barewire4.png3.7 MB
- Base Distribution board.jpg1.3 MB
- brass_insert.png310 KB
- button.png111 KB
- cable_assembly.png330 KB
- CABLE_GLAND.png117 KB
- Connectors JST XH.jpg133 KB
- Connectors JST ZH.png78 KB
- D8_Oval_flange_coupler.png107 KB
- Gripper connector PCB.jpg1.2 MB
- Gripper_cable_contact layout.png23 KB
- GX-F8A.png112 KB
- GX16_disassembled.jpg1.3 MB
- GX16_numbering.jpg1.2 MB
- GX16_numbering2.jpg1.2 MB
- GX16_POWER_CONNECTOR_RCB.png72 KB
- GX16.jpg51 KB
- Hall sensor PCB.jpg317 KB
- HTD 3M belt.png458 KB
- HTD 3M pulley.png212 KB
- INDUCTIVE_4MM.png53 KB
- INDUCTIVE_5MM.png56 KB
- JST_PH.png72 KB
- LIMIT_SWITCH.png28 KB
- M8 cable male head.png159 KB
- M8 connector female 4pin.png143 KB
- M8 connector male 4pin.png137 KB
- M8 male.png130 KB
- M8_female.png130 KB
- Magnet.png597 KB
- MHZ.png43 KB
- PAR6_with_flange.jpg2.2 MB
- PC4-M5.png117 KB
- PM4.png123 KB
- Pneumatic_tube.png255 KB
- shaft coupler gripper.png32 KB
- shaft_coupler_J2_J3.png63 KB
- small tension bearings.png251 KB
- solenoid_valve.png171 KB
- source_coupler.png327 KB
- STEPFOC stepper driver.png1.2 MB
- stepper 10_1.jpg91 KB
- stepper 20_1.jpg89 KB
- stepper 21_5mm.jpg82 KB
- stepper 40mm.jpg127 KB
- stepper 60mm.jpg146 KB
- Tapered bearing.png294 KB
- Thermal cement.jpg120 KB
- Thermistor.png110 KB
- XH_series_dual_female_head.jpg348 KB
- XH_series_extension_cable.png2.0 MB
- ZH_series_dual_female_head.jpg355 KB
- ZH_series_extension_cable.png1.5 MB
- ZH_XH_cable_direction.png4.5 MB
Files by @Source-Robotics, at commit 45a7502, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.