← Mini-Arm
Project files
- micro-servo-sg90-1.snapshot.12 files
- servo-motor-mg-996r-1.snapshot.12 files
- 17mm-mini-USB_connector-panel.SLDPRT142 KB
- 28mm-mini-USB_connector-panel.SLDPRT146 KB
- 90deg_shelf_2mmhole.SLDPRT101 KB
- Arm 01.SLDPRT2.8 MB
- Arm 02 v3.SLDPRT2.3 MB
- Arm 03.SLDPRT1.5 MB
- Arm 04.SLDPRT8.4 MB
- Base.SLDPRT2.0 MB
- camera_bracket.SLDPRT185 KB
- electronics deck V2.SLDPRT461 KB
- electronics deck.SLDPRT292 KB
- esp32_case_back.SLDPRT273 KB
- esp32_case_front.SLDPRT376 KB
- gear1.SLDPRT588 KB
- gear2.SLDPRT737 KB
- grip link 1.SLDPRT432 KB
- Gripper 1.SLDPRT413 KB
- gripper assembly.SLDASM2.5 MB
- Gripper base_old.SLDPRT1.0 MB
- gripper links rotation mount.SLDPRT348 KB
- logic level converter.SLDPRT229 KB
- MiniArm Assembly.SLDASM4.0 MB
- ov7670_adapter.SLDPRT88 KB
- PCA9685_bracket.SLDPRT161 KB
- pca9685.SLDPRT275 KB
- pico.SLDPRT83 KB
- screen_test.SLDPRT419 KB
- single hole 2mm shelf.SLDPRT70 KB
- ssd1306 OLED 0.96inch.SLDPRT124 KB
- TPU_Finger_Cap.SLDPRT129 KB
- TPU_Thumb_Cap.SLDPRT129 KB
- Waist.SLDPRT2.3 MB
Files by @Jshulgach, at commit 666bbb4, read from GitHub in your browser. Hardware license: MPL-2.0; software license: MPL-2.0. Robotheca doesn't review code: read it before running it.