← Kumo 2.5 FPV Drone
Project files
- AntennaMount-CP_TopFront_D2.5mm.step343 KB
- CameraProngMount.step250 KB
- Kumo-MainBody_3DPrintableBasher.step770 KB
- Kumo-MainBody-3DPrintSlim.f3d1.3 MB
- Kumo-MainBody-3DPrintSlim.step731 KB
- Kumo-MainBody-Slim.step387 KB
- Kumo-MainBody-Stubby-2.5mm.step338 KB
- Kumo-ThickBase-Flat.step383 KB
- Kumo-TopPlate-Hooks.f3d417 KB
- Kumo-TopPlate-Hooks.step215 KB
- Kumo-TopPlate-Slim.step250 KB
- KumoX-Frame.step356 KB
- KumoX-TopPlate.step171 KB
- KumoX.dxf34 KB
Files by @kumoishibo, at commit f3103fe, read from GitHub in your browser. Hardware license: CC-BY-4.0; software license: CC-BY-4.0. Robotheca doesn't review code: read it before running it.