← G-Arm
Project files
- #0_ASSEMBLY_ARMS.FCStd129 KB
- #0_ASSEMBLY_ELECTROMAGNET.FCStd2.0 MB
- #0_ASSEMBLY_ELECTROMAGNET.FCStd12.1 MB
- #0_ASSEMBLY_END_EFFECTOR.FCStd29 KB
- #0_ASSEMBLY_END_EFFECTOR.FCStd135 KB
- #0_ASSEMBLY_LINKS.FCStd1.1 MB
- #0_ASSEMBLY_LINKS.FCStd11.3 MB
- #0_ASSEMBLY_MAIN_BASE.FCStd3.1 MB
- #0_ASSEMBLY_MAIN_BASE.FCStd13.6 MB
- #0_ASSEMBLY_MOTORS_BASE.FCStd1.7 MB
- #0_ASSEMBLY_MOTORS_BASE.FCStd12.1 MB
- #0_ASSEMBLY.FCStd13.6 MB
- #0_ASSEMBLY.FCStd115.6 MB
- #1_BaseFloor.20231119-120144.FCBak148 KB
- #1_BaseFloor.FCStd125 KB
- #10_MotorsBasePulleys.FCStd2.4 MB
- #11_Link1.FCStd125 KB
- #11_Link1.FCStd1153 KB
- #12_MotorsBaseSpacer.FCStd9 KB
- #13_MotorsBasePulleyAntiSlip.FCStd16 KB
- #14_Joint2Crank.FCStd42 KB
- #14_Joint2Crank.FCStd156 KB
- #15_Joint1Parallel.FCStd51 KB
- #15_Joint1Parallel.FCStd162 KB
- #16_EndEffectorParallel.FCStd31 KB
- #17_Elbow.FCStd46 KB
- #17_Elbow.FCStd154 KB
- #18_EndStopLink2Adjust.FCStd29 KB
- #19_Link2.FCStd216 KB
- #19_Link2.FCStd1246 KB
- #2_BaseSpacers.20231119-130817.FCBak19 KB
- #2_BaseSpacers.FCStd17 KB
- #20_Link2Parallel.FCStd40 KB
- #21_EndEffector.FCStd89 KB
- #21_EndEffector.FCStd1107 KB
- #22_MotorsSlider.FCStd17 KB
- #23_TOOL_Electromagnet.FCStd33 KB
- #23_TOOL_Electromagnet.FCStd139 KB
- #24_TOOL_Pen.FCStd75 KB
- #24_TOOL_Pen.FCStd11 KB
- #3_BaseTop.20231119-110840.FCBak239 KB
- #3_BaseTop.FCStd218 KB
- #4_BasePulley120T.20231119-134838.FCBak3.0 MB
- #4_BasePulley120T.FCStd2.6 MB
- #5_MotorsBase.FCStd151 KB
- #5_MotorsBase.FCStd1185 KB
- #6_BaseRotationLimit.FCStd16 KB
- #7_MotorsPlateRight.FCStd71 KB
- #8_MotorsPlateLeft.FCStd183 KB
- #9_PasiveBearingSpacer.FCStd9 KB
Files by @vidalperezbohoyo, at commit 506ba11, read from GitHub in your browser. Hardware license: CERN-OHL-S-2.0; software license: CERN-OHL-S-2.0. Robotheca doesn't review code: read it before running it.