← ESP-Drone
Project files
- AFS_SEL.png15 KB
- android_app_download.png38 KB
- api-reference.png7 KB
- assembling_en.png941 KB
- assembling.png767 KB
- board_choose.png10 KB
- burst_read_sequence.png60 KB
- burst_write_sequence.png47 KB
- cfclient_architecture.png30 KB
- cfclient_pid_tune.png217 KB
- cfclient.png91 KB
- cover_page_pdf.jpg32 KB
- crazyflie-overview.png370 KB
- DLPF_CFG.png51 KB
- drivers_flie_struture.png53 KB
- espdrone_app_android_en.png331 KB
- espdrone_app_android.png64 KB
- espdrone_file_structure.pdf82 KB
- espdrone_file_structure.png135 KB
- espdrone_s2_v1_2_2.png393 KB
- espdrone_s2_v1_2_diretion.png2.0 MB
- espdrone_s2_v1_2_diretion2.png404 KB
- espdrone_s2_v1_2_hardware_package.png6.1 MB
- espdrone_s2_v1_2_mainboard.png3.2 MB
- espdrone_s2_v1_2_up.jpg3.0 MB
- espdrone_s2_v1_2_up2.jpg31 KB
- espdrone_s2_v1_2.png2.8 MB
- espilot_app.png19 KB
- esplane_1_0.jpg154 KB
- esplane_2_0.jpg1.7 MB
- esplane_v1_specification.jpg2.3 MB
- espressif-logo.svg7 KB
- FS_SEL.png14 KB
- gamepad_set.png87 KB
- gamepad_settings.png68 KB
- gamepad.jpg82 KB
- General-framework-of-the-stabilization-structure-of-the-crazyflie-with-setpoint-handling.png128 KB
- get-started.png7 KB
- hw-reference.png7 KB
- i2c_signal.png96 KB
- ios_app_download.png27 KB
- log_acc.png119 KB
- log_motion.png62 KB
- log_set.png118 KB
- log_set2.png114 KB
- motors_direction.png53 KB
- mpu6050_dmp_en.png122 KB
- mpu6050_dmp.png46 KB
- mpu6050_int_plot.png34 KB
- mpu6050_raw_value.png96 KB
- mpu6050_xyz.png30 KB
- network_settings.png1.6 MB
- pmw3901_package.png67 KB
- pmw3901_pinmap.png161 KB
- possible_controller_pathways.png193 KB
- REG_19.png18 KB
- REG_1A.png23 KB
- REG_1B.png13 KB
- REG_1C.png13 KB
- REG_3B_40.png45 KB
- REG_41_42.png15 KB
- REG_43_48.png45 KB
- REG_6B.png24 KB
- REG_75.png19 KB
- Schematic-overview-of-inputs-and-outputs-of-the-Complementary-filter.png30 KB
- Schematic-overview-of-inputs-and-outputs-of-the-Extended-Kalman-Filter.png59 KB
- single_byte_read_sequence.png56 KB
- single_byte_WRITE_sequence.png44 KB
- stabilizerTask_process.png37 KB
- stabilizerTask.pdf58 KB
- stabilizerTask.png720 KB
- start_from_app_main.pdf52 KB
- start_from_app_main.png673 KB
- task_dump.png362 KB
- theme_overrides.css1 KB
- vl53l0_package.png27 KB
- vl53l1x_api_platform.png54 KB
- vl53l1x_api.png173 KB
- vl53l1x_max_distance.png77 KB
- vl53l1x_package.png137 KB
- vl53l1x_typical_circuit.png71 KB
- vl53lxx_api_platform.png76 KB
- vl53lxx_boot_sequence.png102 KB
- vl53lxx_calibrate_gui.png163 KB
- vl53lxx_calibration_sequence.png51 KB
- vl53lxx_meaturement_sequence.png92 KB
- vl53lxx_mode.png51 KB
- vl53lxx_pinmap.png38 KB
- vl53lxx_power_up_sequence.png61 KB
- vl53lxx_roi_2.png21 KB
- vl53lxx_roi.png13 KB
- vl53lxx_sequence.png145 KB
Files by @HoneyGrant, at commit 6a6fb32, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.