← Dingo
Project files
- 20 A Buck Converter41 files
- ball joint push rod18 files
- Raspberry Pi 4 Model B28 files
- 20mm M3 Standoff.SLDPRT53 KB
- 4A_Buck_converter.SLDPRT92 KB
- 6705-ZZ 25x32x4mm bearing.SLDPRT119 KB
- 684zz bearing 4x9x4mm.SLDPRT269 KB
- 6mm x 2mm disk magnet.SLDPRT176 KB
- Adafruit IMU BNO055 Stemma.step1.2 MB
- Arduino NANO Terminal Adapter V1_Deek-Robot.stp28.7 MB
- Arduino NANO Terminal Adapter.SLDPRT18.3 MB
- arduino nano.SLDPRT9.8 MB
- CLS6336 35kg servo.SLDPRT512 KB
- DC-DC Step Down Buck Converter CC-CV 300W 20A.step2.2 MB
- Dingo_PCB.SLDPRT6.6 MB
- Estop_R13.SLDPRT87 KB
- Hobbypark 25T Servohorn.SLDPRT202 KB
- LCD Display.SLDPRT402 KB
- m3x4.2x4mm Threaded insert.SLDPRT529 KB
- m4x5x6.4mm Threaded insert.SLDPRT423 KB
- Mirror6705-ZZ 25x32x4mm bearing.SLDPRT38 KB
- MirrorCLS6336 35kg servo.SLDPRT402 KB
- MirrorHobbypark 25T Servohorn.SLDPRT130 KB
- Mirrorm3x4.2x4mm Threaded insert.SLDPRT101 KB
- Mirrorm4x5x6.4mm Threaded insert.SLDPRT116 KB
- MirrorServo Disc.SLDPRT52 KB
- MirrorThust Bearing F4-10 4x10x4mm.SLDPRT36 KB
- on_off_switch.SLDPRT138 KB
- PCA9685.SLDPRT3.2 MB
- Servo Disc.SLDPRT109 KB
- Thust Bearing F4-10 4x10x4mm.SLDPRT112 KB
- Turnigy 4.0 LiPo.SLDPRT57 KB
- XT60E-F.SLDPRT382 KB
Files by @Yerbert, at commit e7e6a62, read from GitHub in your browser. Hardware license: MIT; software license: MIT. Robotheca doesn't review code: read it before running it.