← Desktop Robot Arm
Project files
- assembly-guide-step-01-install-servo-and-bevel-gear.png990 KB
- assembly-guide-step-02-servo-lowering.png822 KB
- assembly-guide-step-03-locking-block.png706 KB
- assembly-guide-step-04-join-bevel-gear-modules.png1.1 MB
- assembly-guide-step-05-install-bevel-gear-cover.png1.0 MB
- assembly-guide-step-06-fit-lower-brace.png1.0 MB
- assembly-guide-step-07-install-fasteners.png1.0 MB
- assembly-guide-step-08-attach-circular-base.png937 KB
- assembly-guide-step-09-install-base-clip.png1.0 MB
- assembly-guide-step-10-install-base-servo.png860 KB
- assembly-guide-step-11-secure-base-servo.png968 KB
- assembly-guide-step-12-install-base-drive-gear.png1.1 MB
- assembly-guide-step-13-install-ring-gear-base.png1.0 MB
- assembly-guide-step-14-install-gripper-jaws.png1.1 MB
- assembly-guide-step-15-install-gripper-gear.png1.1 MB
Files by @cancast, at commit f797ef3, read from GitHub in your browser. Hardware license: MIT; software license: MIT. Robotheca doesn't review code: read it before running it.