Project files

battery_thermal_test.jpg398 KB
BOB-12009.pdf101 KB
both_uncut_pertinax_scheme.jpg280 KB
button_scheme.jpg1.8 MB
camera_microcontroller_scheme.jpg2.3 MB
charger_power_management_scheme.jpg2.4 MB
complete_sockets_pertinax_scheme.jpg442 KB
custom_double_layer_idea.jpg564 KB
driver_scheme.jpg2.5 MB
drv8833.pdf1.1 MB
FS0307-specs.pdf98 KB
GC2145.pdf721 KB
kapton_tape_layer.jpg720 KB
kls7-ts1204.pdf70 KB
level_converter_scheme.jpg2.6 MB
LipoRiderPlus_ETA9740_V1.1.pdf454 KB
LipoRiderPlus_SCH.pdf33 KB
lsm6dsox.pdf9.0 MB
microcontroller_thermal_test.jpg280 KB
motor_encoder_scheme.jpg2.1 MB
motor_thermal_test.jpg281 KB
N20_motors.pdf496 KB
nRF52832.pdf5.2 MB
power_management_thermal_test.jpg460 KB
README.md25 KB
sensor_microcontroller_scheme.jpg2.1 MB
servo_scheme.jpg652 KB
soldering_setup.jpg264 KB
step_up_scheme.jpg2.1 MB
STM32H747_DCMI_interface.jpg302 KB
stm32h747.pdf5.3 MB
switch_fix.jpg615 KB
SX1308.pdf639 KB
tof_compare.jpg295 KB
tof_fov_compare.jpg148 KB
tof_scheme.jpg629 KB
vl53l1x.pdf3.2 MB
vl53l3cx.pdf1.7 MB
wiring_diagram.jpg2.7 MB

README.md

Loading README.md…

Files by @atakanersoy, at commit 2631c62, read from GitHub in your browser. Hardware license: AGPL-3.0-only; software license: AGPL-3.0-only. Robotheca doesn't review code: read it before running it.