← AlohaMini2
Project files
- arm-camera-cables-routed.jpg83 KB
- cable-sleeves-installed.jpg138 KB
- chassis-drive-test.jpg98 KB
- chassis-epoxy-surfaces.jpg51 KB
- chassis-frame-joiner.jpg51 KB
- chassis-joined-frame.jpg63 KB
- chassis-kit.jpg87 KB
- chassis-locking-wedge.jpg65 KB
- chest-camera-back-cover.jpg52 KB
- chest-camera-installed.jpg54 KB
- chest-camera-parts.jpg49 KB
- compute-power-rear-bay.jpg97 KB
- display-bracket-parts.jpg41 KB
- display-mounted.jpg127 KB
- follower-arm-fasteners.jpg119 KB
- follower-arms-mounted.jpg138 KB
- left-cable-bundle.jpg112 KB
- lift-axis-shaft.jpg36 KB
- lift-gear-hardware.jpg45 KB
- lift-gear-on-servo.jpg48 KB
- lift-tower-assembled.jpg84 KB
- lift-tower-parts.jpg95 KB
- omni-wheel-axle-install.jpg49 KB
- omni-wheel-cover-installed.jpg48 KB
- omni-wheel-hardware.jpg72 KB
- power-wiring.jpg133 KB
- right-cable-bundle.jpg108 KB
- shoulder-bearing-install.jpg52 KB
- shoulder-bearing-kit.jpg49 KB
- shoulder-block-on-tower.jpg154 KB
- shoulder-t-frame.jpg33 KB
- top-camera-back-cover.jpg81 KB
- top-camera-mount-installed.jpg80 KB
- top-camera-parts.jpg71 KB
- tower-base-locking.jpg98 KB
- tower-cable-center-hole.jpg47 KB
- tower-cable-port.jpg82 KB
- tower-cable-side-channels.jpg120 KB
- tower-in-chassis-orientation.jpg131 KB
- wheel-connector-on-servo-disc.jpg68 KB
- wheel-connector-tightening.jpg62 KB
- wheel-connectors-and-screws.jpg84 KB
- wheel-servo-cable-routing.jpg71 KB
- wheel-servo-id-layout.jpg64 KB
- wheel-servos.jpg85 KB
Files by @liyiteng, at commit 17c6a98, read from GitHub in your browser. Hardware license: Apache-2.0; software license: Apache-2.0. Robotheca doesn't review code: read it before running it.