← Agipix Quadrotor
Project files
- 1.5mm4 files
- 4mm6 files
- 1_5mm_500x500_1.ai1.3 MB
- 1_5mm_500x600_1.dxf186 KB
- 1_5mm_500x600.ai1.3 MB
- 1_5mm_500x600.dxf203 KB
- 4mm_500x500.ai1.4 MB
- 4mm_500x500.dxf487 KB
- EDITED_new_cut_4mm_500x500.dxf486 KB
- mod_4mm_500x500.ai1.4 MB
- mod_4mm_500x500.dxf446 KB
- mode_whole_4mm_500x500.ai1.6 MB
- new_1_5mm_500x600.ai1.3 MB
- new_4mm_500x500.ai1.3 MB
- new_cut_pattern_4mm_500x500.dxf487 KB
- tocut_1_5mm_500x600 copy.ai1.3 MB
- tocut_1_5mm_500x600.dxf186 KB
- tocut_4mm_500x500 copy.ai1.3 MB
- tocut_4mm_500x500.dxf396 KB
- V2_4mm_500_lidar_1.dxf266 KB
- V2_4mm_500.dxf297 KB
- V3_4mm_500.dxf296 KB
- Whole_pattern_4mm_500x500.dxf966 KB
Files by @SasaKuruppuarachchi, at commit 147a736, read from GitHub in your browser. Hardware license: CC0-1.0; software license: CC0-1.0. Robotheca doesn't review code: read it before running it.