← 400mm Quadcopter Model
Project files
- 3115.SLDPRT3.9 MB
- 75度桨保.SLDPRT284 KB
- 75度桨保上层.SLDPRT257 KB
- 9寸桨叶400轴距机架.SLDASM14.4 MB
- D435i_Solid.SLDPRT1.8 MB
- d435固定板.SLDPRT106 KB
- d435固定板上半（小孔）.SLDPRT103 KB
- LICENSE1 KB
- m3铝柱70mm.SLDPRT55 KB
- mid-360-fov-asm.stp8.1 MB
- orin_agx.SLDPRT96 KB
- Pixhawk_4.step740 KB
- README.md1 KB
- SWIRL_1730.SLDASM511 KB
- SWIRL_1730.SLDPRT2.2 MB
- 上层顶板.SLDPRT402 KB
- 下层底板.SLDPRT91 KB
- 中心底板7mm.SLDPRT113 KB
- 侧壁连接件.SLDPRT188 KB
- 单臂7mm.SLDPRT183 KB
- 小连接.SLDPRT164 KB
- 飞机支架ver1.SLDPRT265 KB
- 飞机支架ver2.SLDPRT332 KB
README.md
Machine-translated by Robotheca from the original in Chinese (opens in a new tab). License: MIT (opens in a new tab).
1. Introduction
This is a personal-designed and developed quadrotor UAV with a 400 mm wheelbase and full protection, suitable for the National Undergraduate Electronic Design Competition.
Files by @Hiromichi123, at commit c3170d5, read from GitHub in your browser. Hardware license: MIT; software license: MIT. Robotheca doesn't review code: read it before running it.