Project files
README.md
Machine-translated by Robotheca from the original in Japanese (opens in a new tab). License: CC-BY-SA-4.0 (opens in a new tab).
Model
This section couldn't be translated automatically. Read the original (opens in a new tab)
STL & STEP
[!NOTE] STEP形式を推奨しています．
| ファイル名 | 説明 | 印刷数 | 素材 |
|---|---|---|---|
| cover_b_2-1.stlcover_b_2-1.step | 本体カバーの下部 | 1 | PLA |
| cover_stopper.stlcover_stopper.step | 本体カバーの上部と下部を繋げるアタッチメント | 4 | TPU |
| cover_t_2-1.stlcover_t_2-1.step | 本体カバーの上部 | 1 | PLA |
| main_frame_2-1.stlmain_frame_2-1.step | メインフレーム | 1 | TPU |
| motor_frame_2-1.stlmotor_frame_2-1.step | ギアボックスを包むカバー | 21 | TPU |
| wheel_b_2-1.stlwheel_b_2-1.step | メインタイヤ | 2 | TPU |
| wheel_t.stlwheel_t.step | 上部滑車 | 4 | TPU |
| wheel_t_shaft.stlwheel_t_shaft.step | 上部滑車の軸 | 4 | PLA |
Footnotes
-
motor_frame_2-1は，左右対称で1個ずつ計2個を印刷． ↩
2-1Gen_KOROBO.step
You can check the positional relationships of the various parts, among other things.
[!IMPORTANT] Some of the internal data is borrowed from volunteers participating in GRABCAD COMMUNITY (opens in a new tab)12.
Footnotes
-
Raspberry Pi Pico >> https://grabcad.com/library/raspberry-pi-pico-3 (opens in a new tab) ↩
-
Atmega328 >> https://grabcad.com/library/atmega328-1 (opens in a new tab) ↩
korobo_2-1_PLA.3mf & korobo_2-1_TPU.3mf
These are project files edited in the slicer software Bambu Studio (printer setting: A1 mini).
If you own a Bambu Lab product, please select your printer and filament and slice the files.
Files by @KORokoro-rOBOt-project, at commit 16168ac, read from GitHub in your browser. Hardware license: CC-BY-SA-4.0; software license: CC-BY-SA-4.0. Robotheca doesn't review code: read it before running it.