← THING Tendon Hand
Project files
- Thing_V5_2_1_01_V521_PRINT_01_PALM_CORE.stl1 KB
- Thing_V5_2_1_02_V521_PRINT_INDEX_PROXIMAL.stl1 KB
- Thing_V5_2_1_03_V521_PRINT_INDEX_MIDDLE.stl1 KB
- Thing_V5_2_1_04_V521_PRINT_INDEX_DISTAL.stl1 KB
- Thing_V5_2_1_05_V521_PRINT_MIDDLE_PROXIMAL.stl1 KB
- Thing_V5_2_1_06_V521_PRINT_MIDDLE_MIDDLE.stl1 KB
- Thing_V5_2_1_07_V521_PRINT_MIDDLE_DISTAL.stl1 KB
- Thing_V5_2_1_08_V521_PRINT_RING_PROXIMAL.stl1 KB
- Thing_V5_2_1_09_V521_PRINT_RING_MIDDLE.stl1 KB
- Thing_V5_2_1_10_V521_PRINT_RING_DISTAL.stl1 KB
- Thing_V5_2_1_11_V521_PRINT_LITTLE_PROXIMAL.stl1 KB
- Thing_V5_2_1_12_V521_PRINT_LITTLE_MIDDLE.stl1 KB
- Thing_V5_2_1_13_V521_PRINT_LITTLE_DISTAL.stl1 KB
- Thing_V5_2_1_14_V521_PRINT_THUMB_METACARPAL.stl1 KB
- Thing_V5_2_1_15_V521_PRINT_THUMB_PROXIMAL.stl1 KB
- Thing_V5_2_1_16_V521_PRINT_THUMB_DISTAL.stl1 KB
- Thing_V5_2_1_17_V521_PRINT_THUMB_CMC_YOKE.stl1 KB
- Thing_V5_2_1_18_V52_CAL_BORE_LADDER.stl1 KB
- Thing_V5_2_1_19_V52_CAL_CLEARANCE_SLOTS.stl1 KB
- Thing_V5_2_1_20_V52_CAL_HORIZONTAL_BORES.stl1 KB
- Thing_V5_2_1_21_V52_CAL_M2_TERMINATION_STACK.stl1 KB
- Thing_V5_2_1_22_V52_CAL_WRIST_INSERT_PILOTS.stl1 KB
- Thing_V5_2_1_23_V52_CAL_CMC_A_POS_MICRO_SWAGE.stl1 KB
- Thing_V5_2_1_24_V52_CAL_CMC_CROSSBORE_SWAGE.stl1 KB
- Thing_V5_2_1_25_V52_CAL_CMC_C90_BRIDGE_SWAGE.stl1 KB
Files by @SeMinKong, at commit 4b39eab, read from GitHub in your browser. Hardware license: Apache-2.0; software license: Apache-2.0. Robotheca doesn't review code: read it before running it.