← T-Top
Project files
- ball-joint-alignment.jpg229 KB
- big-spring-M3x12.jpg69 KB
- big-spring-M3x8.jpg69 KB
- big-spring.jpg68 KB
- bottom-rod.jpg67 KB
- cable-tie.jpg94 KB
- dynamixel-control-PCB.jpg103 KB
- dynamixel-screws-1.jpg79 KB
- dynamixel-screws-2.jpg78 KB
- dynamixel-screws-3.jpg74 KB
- ids.jpg213 KB
- small-spring-M2.5x12.jpg73 KB
- small-spring-M2.5x8.jpg73 KB
- stewart-bottom.jpg211 KB
- stewart-horn-left-M2.5.jpg68 KB
- stewart-horn-left-M3.jpg44 KB
- stewart-horn-right-M2.5.jpg67 KB
- stewart-horn-right-M3.jpg40 KB
- stewart-rod.jpg53 KB
- stewart-top-1.jpg64 KB
- stewart-top-2.jpg167 KB
- USB-hub-stands.jpg260 KB
- USB-hubs.jpg226 KB
Files by @introlab, at commit 8d1b471, read from GitHub in your browser. Hardware license: CC-BY-NC-SA-4.0; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.