← T-Top
Project files
- 19V-buck-boost-nuts.jpg226 KB
- 19V-buck-boost-wires.jpg226 KB
- amplifier-i2c.jpg277 KB
- amplifier-wires-1.jpg515 KB
- amplifier-wires-2.jpg515 KB
- amplifier-wires-3.jpg241 KB
- amplifier-wires-4.jpg454 KB
- amplifier-wires-5.jpg454 KB
- amplifier-wires-6.jpg111 KB
- amplifier.jpg129 KB
- base-audio-screws-1.jpg75 KB
- base-audio-screws-2.jpg69 KB
- base-audio-screws-3.jpg71 KB
- base-audio.jpg134 KB
- base-disk.jpg156 KB
- battery.jpg114 KB
- dowel-pins.jpg100 KB
- ethernet-connector.jpg197 KB
- fan-1.jpg205 KB
- fan-2.jpg172 KB
- fan-connectors.jpg224 KB
- jst-phr6-cable.jpg278 KB
- led-connectors.jpg278 KB
- led-strips-connectors.jpg222 KB
- led-strips.jpg241 KB
- leds.jpg159 KB
- light-sensor-connectors.jpg234 KB
- light-sensors-1.jpg117 KB
- light-sensors-2.jpg136 KB
- light-sensors-3.jpg133 KB
- light-sensors-4.jpg107 KB
- magnet-1.jpg61 KB
- magnet-2.jpg54 KB
- magnet-3.jpg63 KB
- magnet-4.jpg59 KB
- micro-usb-connector-teensy.jpg279 KB
- micro-usb-connector.jpg163 KB
- power-connector-JST.jpg278 KB
- power-connector.jpg159 KB
- power-switch-connector.jpg234 KB
- power-switch.jpg190 KB
- push-button-connectors.jpg217 KB
- push-buttons.jpg181 KB
- speaker-1.jpg144 KB
- speaker-2.jpg163 KB
- tie-wraps.jpg283 KB
Files by @introlab, at commit 8d1b471, read from GitHub in your browser. Hardware license: CC-BY-NC-SA-4.0; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.