← T-Top
Project files
- 16SoundsUSB.SLDPRT5.7 MB
- 8SoundsUSB Mic.SLDPRT2.2 MB
- Adafruit MAX9744.SLDPRT115 KB
- Anker USB-c hub (4 ports).SLDPRT93 KB
- Battery charger RRC-PMM240.SLDPRT126 KB
- Battery RRC2054-2.SLDPRT97 KB
- buck boost.SLDPRT143 KB
- button nut.SLDPRT98 KB
- button.SLDPRT93 KB
- Dayton Audio DMA45-8.SLDPRT200 KB
- dynamixel control.SLDPRT100 KB
- ground loop noise isolator.SLDPRT93 KB
- Intel RealSense D435i.SLDPRT135 KB
- Jetson AGX Orin.SLDPRT765 KB
- Jetson AGX Xavier.SLDPRT259 KB
- LED 5mm.SLDPRT103 KB
- LED level.SLDPRT74 KB
- LED strip.SLDPRT254 KB
- light sensor.SLDPRT93 KB
- limit switch.SLDPRT67 KB
- Micro USB B (Adafruit 4217).SLDPRT105 KB
- Micro USB B nut (Adafruit 4217).SLDPRT119 KB
- Noctua NF-A4X20.SLDPRT290 KB
- psu control.SLDPRT120 KB
- RJ45 connector.SLDPRT99 KB
- SC2073-ND.SLDPRT118 KB
- screen.SLDPRT165 KB
- slip ring (SNM220A-24).SLDPRT92 KB
- switch.SLDPRT94 KB
- wide angle camera.SLDPRT143 KB
- XL430-W250-T.SLDPRT127 KB
Files by @introlab, at commit 8d1b471, read from GitHub in your browser. Hardware license: CC-BY-NC-SA-4.0; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.