← RR1: Real Robot One
Project files
- J-mini_actuator-ring.stl429 KB
- J-mini_bearing-ring.stl249 KB
- J-mini_encoder-belt-ring_front.stl86 KB
- J-mini_encoder-belt-ring_rear.stl138 KB
- J-mini_gearbox-cage-A.stl183 KB
- J-mini_gearbox-cage-B.stl147 KB
- J-mini_inner-gear_low.stl177 KB
- J-mini_inner-gear-high.stl177 KB
- J-mini_monoblock.stl406 KB
- J-mini_outer-gear.stl393 KB
- J-mini_wrist-side-rotator.stl187 KB
- L-elb_encoder-bottomhold.stl88 KB
- L-elb_encoder-sidehold.stl79 KB
- L-elb_encoder-uphold.stl76 KB
- L-elb_encoder-washer.stl33 KB
- L-elb_major-conno_nomoto_cover.stl211 KB
- L-elb_major-conno-moto.stl310 KB
- L-elb_major-conno-nomoto.stl282 KB
- L-elb_major-moto-cavo-reinforced.stl286 KB
- L-elb_moto-hold.stl107 KB
- L-elb_moto-shaft.stl43 KB
- L-elb_xorior-cover-A.stl51 KB
- L-elb_xorior-cover-B.stl51 KB
- L-elb_xorior-cover-C.stl41 KB
- L-elb_xorior-cover-D.stl41 KB
- L-elb_xorior-cover.stl55 KB
- L-elb_xorior-hole.stl295 KB
- L-elb_xorior-washer.stl41 KB
- T-mini_bearing-cover.stl39 KB
- T-mini_big-gear-lower-shaft-nuovo.stl265 KB
- T-mini_big-gear-lower-shaft.stl260 KB
- T-mini_big-gear-shaft-nuovo.stl231 KB
- T-mini_big-gear-upper-5.stl71 KB
- T-mini_big-gear-upper-8.stl71 KB
- T-mini_big-gear-upper-hole-unused.stl79 KB
- T-mini_box-cover.stl181 KB
- T-mini_box.stl201 KB
- T-mini_logo.stl22 KB
- T-mini_small-box.stl86 KB
- T-mini_small-gear-lower-shaft.stl72 KB
- T-mini_small-gear-upper.stl192 KB
- T-mini_washer.stl62 KB
Files by @surynek, at commit cfbfeba, read from GitHub in your browser. Hardware license: AGPL-3.0-only; software license: AGPL-3.0-only. Robotheca doesn't review code: read it before running it.