← RR1: Real Robot One
Project files
- J-max_actuator-ring.stl2.8 MB
- J-max_actuator.stl750 KB
- J-max_arm-bearing-fix.stl288 KB
- J-max_bearing-fix.stl144 KB
- J-max_bearing-ring.stl930 KB
- J-max_bedding.stl79 KB
- J-max_cover.stl262 KB
- J-max_encoder-belt-ring-A.stl173 KB
- J-max_encoder-belt-ring-B.stl275 KB
- J-max_encoder-inhold.stl136 KB
- J-max_encoder-outhold.stl120 KB
- J-max_encoder-sidehold.stl57 KB
- J-max_encoder-washer.stl50 KB
- J-max_gear-base-left.stl201 KB
- J-max_gear-base-right.stl172 KB
- J-max_gearbox-cage-A.stl414 KB
- J-max_gearbox-cage-B.stl533 KB
- J-max_inner-planet.stl1.0 MB
- J-max_monoblock.stl2.3 MB
- J-max_moto-clutch.stl47 KB
- J-max_moto-hold-low.stl289 KB
- J-max_motor-holder.stl289 KB
- J-max_motor-shaft-extended-reinforced.stl186 KB
- J-max_motor-shaft.stl94 KB
- J-max_motor-washer.stl150 KB
- J-max_outer-bearing.stl407 KB
- J-max_outer-planeo.stl1.2 MB
- J-max_outer-planet.stl4.1 MB
- J-max_turn-moto-hold.stl159 KB
- J-max_undermotor-cover.stl511 KB
- J-max_undermotor-undercover.stl324 KB
Files by @surynek, at commit cfbfeba, read from GitHub in your browser. Hardware license: AGPL-3.0-only; software license: AGPL-3.0-only. Robotheca doesn't review code: read it before running it.