← RR1: Real Robot One
Project files
- G-midi_actuator-ring-centric.stl407 KB
- G-midi_actuator-ring.stl421 KB
- G-midi_adaptor-supershifted.stl410 KB
- G-midi_arm-rotator.stl116 KB
- G-midi_bear-fix.stl109 KB
- G-midi_bear-hold-encoder-front.stl107 KB
- G-midi_bear-hold-encoder-rear.stl302 KB
- G-midi_bearing-ring-centric-lax.stl261 KB
- G-midi_bearing-ring-centric.stl271 KB
- G-midi_bearing-ring.stl271 KB
- G-midi_belt-wheel-front.stl36 KB
- G-midi_belt-wheel-rear.stl67 KB
- G-midi_extrusion-cover-supershift.stl70 KB
- G-midi_gearbox-cage-A.stl121 KB
- G-midi_gearbox-cage-B.stl150 KB
- G-midi_inner-gear-part-A-lax.stl252 KB
- G-midi_inner-gear-part-B-prolonged.stl78 KB
- G-midi_inner-gear-part-B.stl154 KB
- G-midi_monoblock.stl516 KB
- G-midi_monoblok.stl2.2 MB
- G-midi_motohold.stl146 KB
- G-midi_outer-gear.stl834 KB
- G-midi_rotator-fix.stl46 KB
- G-midi_super-washer.stl209 KB
- J-midi_actuator-ring.stl2.8 MB
- J-midi_arm-bearing-fix.stl288 KB
- J-midi_bearing-ring.stl1.5 MB
- J-midi_encoder-belt-ring_A.stl264 KB
- J-midi_encoder-belt-ring_B.stl250 KB
- J-midi_encoder-inhold.stl257 KB
- J-midi_encoder-outhold.stl246 KB
- J-midi_encoder-sidehold.stl95 KB
- J-midi_encoder-washer.stl50 KB
- J-midi_gearbox-cage-A.stl412 KB
- J-midi_gearbox-cage-B.stl515 KB
- J-midi_inner-planet.stl965 KB
- J-midi_monoblock.stl2.5 MB
- J-midi_motor-washer.stl146 KB
- J-midi_outer-planet.stl3.9 MB
- J-midi_RR1-logo.stl43 KB
- J-midi_undermotor-cover.stl507 KB
- J-midi_undermotor-undercover.stl281 KB
- T-midi_big-gear-lower-hollow-shaft.stl155 KB
- T-midi_big-gear-upper.stl193 KB
- T-midi_box-cover-rev.stl181 KB
- T-midi_box.stl231 KB
- T-midi_moto-shaft.stl40 KB
- T-midi_small-box.stl103 KB
- T-midi_small-gear-lower-shaft.stl70 KB
- T-midi_small-gear-upper.stl198 KB
- T-midi-logo_rev.2.stl30 KB
Files by @surynek, at commit cfbfeba, read from GitHub in your browser. Hardware license: AGPL-3.0-only; software license: AGPL-3.0-only. Robotheca doesn't review code: read it before running it.