← Project quad
Project files
- .$firmware.layout.bkp2 KB
- droneframe_image.png424 KB
- firmware.layout2 KB
- free_body_pitch2 KB
- free_body_pitch.png23 KB
- inertia_test_setup.png1.3 MB
- inertia_torquer.png2.1 MB
- main_pcb_2d.png248 KB
- main_pcb.jpg221 KB
- main_pcb.png971 KB
- readme_frontimage_2.jpg253 KB
- readme_frontimage_2.png4.1 MB
- readme_frontimage_3.jpg124 KB
- readme_frontimage.jpg527 KB
- roll_moment_of_inertia.jpg65 KB
- roll_moment_of_inertia.svg61 KB
- rusty_quad_diagram.drawio20 KB
- rusty-quad-diagram.png111 KB
- thrust_linearization.jpg76 KB
- thrust_linearization.svg100 KB
- thrust_step_plot.jpg60 KB
- thrust_step_plot.svg91 KB
Files by @peterkrull, at commit c23fa9a, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.