← PrintPupper
Project files
- 01_print_knee_horn_4pcs.step112 KB
- 02_print_upper_leg_4pcs.step84 KB
- 03_print_knee_linkage_4pcs_Hard.step93 KB
- 03_print_knee_linkage_4pcs_Rigid.step65 KB
- 03_print_knee_linkage_4pcs.step93 KB
- 04_new_print_lower_leg_L_2pcs.step142 KB
- 04_print_lower_leg_L_2pcs.step148 KB
- 05_new_print_lower_leg_R_2pcs.step186 KB
- 05_print_lower_leg_R_2pcs.step191 KB
- 06_new_print_lower_leg_cap_4pcs.step37 KB
- 06_print_lower_leg_cap_4pcs.step40 KB
- 07_print_coxa_FL_1pcs.step395 KB
- 08_print_coxa_FR_1pcs.step437 KB
- 09_print_coxa_BL_1pcs.step449 KB
- 10_print_coxa_BR_1pcs.step497 KB
- 11_print_center_torso_1pcs.step955 KB
- 12_print_front_torso_1pcs.step423 KB
- 13_print_back_torso_1pcs.step515 KB
- 14_print_battery_holder_2pcs.step90 KB
- 15_print_pcb_box_1pcs.step233 KB
- 16_print_pcb_box_lid_1pcs.step215 KB
- 17_print_stand_upper_1pcs.step264 KB
- 18_print_stand_lower_1pcs.step320 KB
- 19_print_calibration_plate_1pcs.step193 KB
- 20_print_deco_head_1pcs.step509 KB
- 21_print_deco_head_stay_1pcs.step102 KB
- 22_print_deco_head_triC1_1pcs.step267 KB
- 23_print_deco_head_triC2_1pcs.step262 KB
- 24_print_deco_head_triC3_1pcs.step263 KB
- 25_print_deco_head_triSnap_4pcs.step39 KB
- 26_print_deco_tail_base_1pcs.step39 KB
- 27_print_deco_tail_node_6pcs.step71 KB
- THIS_FOLDER_FILES_ARE_v02_LATER_STEP_FORMAT.txt1 KB
Files by @r9kawai, at commit e86f61b, read from GitHub in your browser. Hardware license: MIT; software license: MIT. Robotheca doesn't review code: read it before running it.