← pib
Project files
- C09-Central_rotator_connector.stl1.4 MB
- C15-Central_rotator_motor_connector.stl705 KB
- C18L-Forearm_distal_lock_left.stl1.6 MB
- C18R-Forearm_distal_lock_right.stl1.6 MB
- C19L-Forearm_distal_top_left.stl15.8 MB
- C19R-Forearm_distal_top_right.stl15.8 MB
- C25-Forearm_disc_bottom.stl485 KB
- C26-Forearm_disc_top.stl587 KB
- C27-Forearm_bearing_distance_ring.stl115 KB
- C28-Forearm_bearing_center.stl379 KB
- C30-Forearm_bar.stl583 KB
- C31-Elbow_shaft_motor.stl1.5 MB
- C32-Elbow_axis_cable.stl692 KB
- C33-Elbow_motor_flange.stl709 KB
- C34-Elbow_motor_connection.stl556 KB
- C35L-Elbow_clamp_left.stl1.7 MB
- C35R-Elbow_clamp_right.stl1.8 MB
- C36-Elbow_lower_shell.stl12.5 MB
- C37-Elbow_rotator_bracket.stl1.9 MB
- C38-Elbow_cover.stl1.2 MB
- C39-Elbow_upper_shell.stl6.2 MB
- C40-Elbow_upper_shell_lock.stl1.2 MB
- C41-Elbow_central_motor_flange.stl582 KB
- C51-Wire-Protector_Servo-Array-Scaffold.stl3.6 MB
- C52-Servo_Tube_Cover.stl655 KB
- C60-Flange_Inner_Shoulder.stl478 KB
- C60L-Servo-Array-Scaffold_left.stl11.7 MB
- C60R-Servo-Array-Scaffold_right.stl11.6 MB
- C61-Motor_Bracket_Inner_Shoulder.stl2.6 MB
- C62-Ringflange_Inner_Shoulder.stl1.1 MB
- C63-Motor_Axis_Inner_Shoulder.stl3.7 MB
- C64-Motor_Axis_Cap_Inner_Shoulder.stl2.1 MB
- C65-Bracket_Outer_Shoulder.stl4.3 MB
- C66-Cap_Front_Outer_Shoulder.stl2.2 MB
- C67-Cap_Back_Outer_Shoulder.stl4.5 MB
- C68-Inner_Ring_Outer_Shoulder.stl610 KB
- C69-Inner_Part_Outer_Shoulder.stl6.0 MB
- C70-Shell_Outer_Shoulder.stl3.5 MB
- C72-Plate_Outer_Shoulder.stl193 KB
- C73-Wire-holder-pin.stl207 KB
- C74-Wire_holder.stl1.5 MB
- C75-Front_Bracket_Outer_Shoulder.stl3.5 MB
- C76-Shell_cap.stl4.5 MB
- C77-Central_rotator_motor_connector-shoulder.stl693 KB
- C78-Central_rotator_bracket-shoulder.stl1.0 MB
Files by @pib-rocks, at commit 7357d67, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.