← NOVA2 Rover
Project files
- 16mm_Bearing.SLDPRT115 KB
- 200mm Belt.SLDPRT939 KB
- 30mm_Bearing.SLDPRT103 KB
- 3mmBearing.SLDPRT108 KB
- 50mmBearing.SLDPRT105 KB
- 8mm Rigid Flange Coupling v2.step181 KB
- 8mmBearing.SLDPRT105 KB
- 8mmShaft.SLDPRT61 KB
- 94180A321_Brass Tapered Heat-Set Inserts for Plastic (3).STEP2.2 MB
- 94180A331_Brass Tapered Heat-Set Inserts for Plastic (2).STEP2.2 MB
- 94180A351_Brass Tapered Heat-Set Inserts for Plastic (5).STEP2.3 MB
- Adafruit_BNO055.SLDPRT1.3 MB
- Back_Chassis_Screw_Plate_Template.SLDPRT239 KB
- Battery_Switch.SLDPRT221 KB
- BearingRetainer_008.SLDPRT85 KB
- Connecting_Triangle_Bracket.SLDPRT303 KB
- ConnectingBracket_012.STEP41 KB
- ConnectingBracket_012.step.SLDPRT72 KB
- Connector_Clamp.SLDPRT152 KB
- Connector.step18 KB
- Deutsch_Connection.SLDASM681 KB
- Deutsch_DTM04_12P.SLDPRT924 KB
- Deutsch_DTM06-12S.SLDPRT1.1 MB
- Differential_Bar.SLDPRT112 KB
- Differential_Bearing_Block.SLDPRT72 KB
- Differential_Cap.SLDPRT54 KB
- Differential_M4_Linkage.SLDPRT234 KB
- Differential_M4_Push_Bar.SLDPRT45 KB
- Differential_Shaft.SLDPRT108 KB
- Flange_Coupler.SLDPRT153 KB
- Front_Chassis_Screw_Plate_Template.SLDPRT619 KB
- GearSrandOffs_014.SLDPRT62 KB
- GT2 Pulley 20 Tooth (ID6mm).SLDPRT275 KB
- GT2_20T-sh8.SLDPRT355 KB
- Half_Breadboard.SLDPRT7.2 MB
- HornAdapter_010.SLDPRT482 KB
- Jetson_Mount_Housing.SLDPRT249 KB
- Jetson_Mount_Lid.SLDPRT179 KB
- Jetson_Orin_Nano_Dev_Kit.SLDPRT79.0 MB
- LegClamp_015.SLDPRT102 KB
- MagentHolder_011.SLDPRT79 KB
- Motor_Driver.SLDPRT1.2 MB
- NOVA_Assembly_Chassis.SLDASM38.1 MB
- NOVA_Assembly_Diff_Bar_Connect.SLDASM4.3 MB
- NOVA_Assembly_Diff_Bar.SLDASM4.2 MB
- NOVA_Assembly_Right_Drivetrain.SLDASM5.2 MB
- NOVA_Battery_Case_Lid.SLDPRT172 KB
- NOVA_Battery_Case.SLDPRT434 KB
- NOVA_Chassis_Assembly.SLDASM38.7 MB
- NOVA_Chassis_Bottom_Tub_Female.SLDPRT712 KB
- NOVA_Chassis_Bottom_Tub_Male.SLDPRT667 KB
- NOVA_Chassis_Bracket.SLDPRT516 KB
- NOVA_Chassis_Lid_front.SLDPRT359 KB
- NOVA_Chassis_Lid.SLDPRT341 KB
- NOVA_Fan.SLDPRT1.3 MB
- NOVA_V2_Assembly.SLDASM43.3 MB
- Part Studio 1 - Nano_mount_Base.step230 KB
- Part Studio 1.step186 KB
- PDB.SLDPRT1.6 MB
- pi-pico-2w.SLDPRT15.7 MB
- PlanetCarrier_006.SLDPRT255 KB
- ROBOTIS_U2D2_Power_Hub_Board.SLDASM401 KB
- Rubber_Grommet.SLDPRT143 KB
- Ruthex_RX-M5Sx5.8_Heated_Insert.SLDPRT1.3 MB
- Square_Leg_Tube.SLDPRT78 KB
- SwereModuleDynamicsV2_bottom.SLDASM3.8 MB
- SwereModuleDynamicsV2_other_config_top.SLDASM1.9 MB
- SwereModuleDynamicsV2_top.SLDASM1.9 MB
- SwereModuleDynamicsV2.SLDASM7.3 MB
- SwereModuleV2.SLDASM1.9 MB
- TopStageSwerve_007.SLDPRT697 KB
- Wheel_002.SLDPRT4.4 MB
- WheelBracket_000_configs.STEP388 KB
- WheelBracket_000_configs.step.SLDPRT285 KB
- WheelBracket_001_configs.STEP415 KB
- WheelBracket_001_configs.step.SLDPRT301 KB
- WheelShaftWasher_013.SLDPRT70 KB
- XL-430_new.stp1.2 MB
- ZED 2i Narrow.step1.8 MB
- Zed_mount_Base.SLDPRT283 KB
- ZED_mount.SLDPRT164 KB
Files by @AstroX-OpenRover, at commit fe8a000, read from GitHub in your browser. Hardware license: CC-BY-NC-SA-4.0; software license: CC-BY-NC-SA-4.0. Robotheca doesn't review code: read it before running it.