← Gretchen
Project files
- camera_gimbal_intel7 files
- shells4 files
- belt-tightener.f3d80 KB
- Flange_Bearing_Drills.f3d37 KB
- flange_bearing.f3d68 KB
- grt_cardan_joint_20190218.f3d206 KB
- grt_cardan_joint_pulley_33T_20190328.f3d946 KB
- grt_cardan_joint_pulley_42T_20190328.f3d1.1 MB
- grt_foot_20190328.f3z6.2 MB
- grt_foot_motor_pulley_33T_20190328.f3d2.0 MB
- grt_knee_20190218.f3z2.9 MB
- grt_knee_inner_20190218.f3z125 KB
- grt_lower_torso_20190218.f3d283 KB
- grt_shank_20190218.f3z156 KB
- grt_thigh_20190218.f3d319 KB
- Hitec_HS-805MG.f3d188 KB
- rectangle foot.f3z6.2 MB
- simple_spacer.f3d46 KB
- supreme_GT3_pulley_42T_7mm_axel_connector_20190121.f3d2.9 MB
- supreme_GT3_pulley_42T_7mm_d1_spline_20190218.f3d2.5 MB
- supreme_GT3_pulley_42T_7mm_M8_nut_20190121.f3d3.0 MB
- supreme_Hitec_HS805_MG_cap_20190121.f3d401 KB
- supreme_hitec_HS805-MG_contour.f3d35 KB
Files by @aibrainag, at commit f2b16d6, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.