← Flix
Project files
- assembly7 files
- user82 files
- 100n03a.jpg27 KB
- arduino-ide.png71 KB
- arming.svg1 KB
- axes-rotation.svg2 KB
- battery.jpg33 KB
- betafpv.jpg26 KB
- buck-boost.jpg34 KB
- charger.jpg21 KB
- cli.png28 KB
- control.svg15 KB
- controls.svg4 KB
- dataflow.svg13 KB
- disarming.svg1 KB
- drone-axes-rotate.svg4 KB
- drone-axes.svg3 KB
- esc.jpg57 KB
- esp32-holder.jpg10 KB
- esp32.jpg158 KB
- espnow-connection.jpg47 KB
- flight-video.jpg81 KB
- flightplot.png57 KB
- flix.jpg95 KB
- flix.svg2 KB
- flix1.1.jpg126 KB
- flix1.5.jpg103 KB
- flix1.jpg91 KB
- flixperiph.png18 KB
- foxglove.png62 KB
- frame.jpg61 KB
- frame1.jpg11 KB
- gy-521.jpg30 KB
- gy-91.jpg83 KB
- gy91-lfd.svg48 KB
- gyro-calibrated-plotter.png118 KB
- gyro-plotter.png116 KB
- gyro-uncalibrated-plotter.png107 KB
- gyroscope.jpg36 KB
- icm-20948.jpg37 KB
- imu-axes.png33 KB
- imu-axes.svg3 KB
- imu-rot-1.png18 KB
- imu-rot-2.png18 KB
- imu-rot-3.png18 KB
- imu-rot-4.png18 KB
- imu-rot-5.png10 KB
- imu-rot-6.png10 KB
- imu-rot-7.png11 KB
- imu-rot-8.png11 KB
- inv.jpg6 KB
- kingkong.jpg37 KB
- left-axes.svg1 KB
- logitech.jpg26 KB
- mosfet-connection.png47 KB
- motor-tape.jpg62 KB
- motor.jpeg106 KB
- motors.svg3 KB
- mpu9250.jpg12 KB
- mx.png16 KB
- parameters.png28 KB
- plotjuggler.png55 KB
- prop.jpg31 KB
- qgc-attitude.png16 KB
- qgc-proxy.png24 KB
- resistor10k.jpg13 KB
- right-axes.svg1 KB
- rx.jpg10 KB
- schematics.svg43 KB
- schematics1.svg18 KB
- screw-m1.4.jpg31 KB
- screw-m3.jpg4 KB
- simulator.png344 KB
- simulator1.png334 KB
- washer-m3.jpg7 KB
- web-flasher.png67 KB
- wire-28awg.jpg37 KB
Files by @okalachev, at commit 1f5b268, read from GitHub in your browser. Hardware license: NONE; software license: NONE. Robotheca doesn't review code: read it before running it.