← eXplora Tailsitter VTOL
Project files
- eXplora_VTOL_V1.00_14mm_Bayonet_Adapter_LR.step21 KB
- eXplora_VTOL_V1.00_16mm_Bayonet_Adapter_LR.step21 KB
- eXplora_VTOL_V1.00_Canopy_1.step4.3 MB
- eXplora_VTOL_V1.00_Canopy_2.step2.4 MB
- eXplora_VTOL_V1.00_Canopy_Bracket.step68 KB
- eXplora_VTOL_V1.00_Elevon_L1.step277 KB
- eXplora_VTOL_V1.00_Elevon_L2.step281 KB
- eXplora_VTOL_V1.00_Elevon_Lock_LR.step88 KB
- eXplora_VTOL_V1.00_ESC_cover_L.step478 KB
- eXplora_VTOL_V1.00_FC_Housing.step191 KB
- eXplora_VTOL_V1.00_Fuselage_1.step1.6 MB
- eXplora_VTOL_V1.00_Fuselage_2.step7.9 MB
- eXplora_VTOL_V1.00_Fuselage_3.step8.2 MB
- eXplora_VTOL_V1.00_Fuselage_4_insert.step4.2 MB
- eXplora_VTOL_V1.00_Fuselage_4.step4.9 MB
- eXplora_VTOL_V1.00_Fuselage_5.step547 KB
- eXplora_VTOL_V1.00_Fuselage_Cable_Connector_Holder_L.step564 KB
- eXplora_VTOL_V1.00_Fuselage_Payload_Holder.step153 KB
- eXplora_VTOL_V1.00_Motor_Support_19x25_L.step815 KB
- eXplora_VTOL_V1.00_Motor_Support_25x19_L.step834 KB
- eXplora_VTOL_V1.00_Motor_Support_25x25_L.step819 KB
- eXplora_VTOL_V1.00_Pitot_cover_label.step739 KB
- eXplora_VTOL_V1.00_Pitot_cover.step41 KB
- eXplora_VTOL_V1.00_Servo_Holder_LR.step175 KB
- eXplora_VTOL_V1.00_Vertical_Stabilizer_4mm_Tube_Holder_Down.step28 KB
- eXplora_VTOL_V1.00_Vertical_Stabilizer_4mm_Tube_Holder_Up.step28 KB
- eXplora_VTOL_V1.00_Vertical_Stabilizer_Down.step527 KB
- eXplora_VTOL_V1.00_Vertical_Stabilizer_Tube_Cap_Up-Down.step23 KB
- eXplora_VTOL_V1.00_Vertical_Stabilizer_Up.step571 KB
- eXplora_VTOL_V1.00_Wing_L1.step1.1 MB
- eXplora_VTOL_V1.00_Wing_L2.step557 KB
- eXplora_VTOL_V1.00_Wing_L3.step1.2 MB
- eXplora_VTOL_V1.00_Wing_L4.step330 KB
- eXplora_VTOL_V1.00_Wing_L5_Long.step572 KB
- eXplora_VTOL_V1.00_Wing_L5.step450 KB
- eXplora_VTOL_V1.00_Wing_Tube_Cap_LR.step20 KB
Files by @robustini, at commit 1da97a4, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.