← DIY Delta robot
Project files
- as5600_encoder_mount.stl198 KB
- bearing_mount.stl48 KB
- bottom_plate.dxf500 KB
- carbon_tube_holder_closed.stl101 KB
- carbon_tube_holder_opened.stl98 KB
- COPYING35 KB
- effector_forearm_mounting.stl54 KB
- effector_plate.dxf442 KB
- elbow_joint_1.stl351 KB
- elbow_joint_2.stl108 KB
- motor_mount_holder.stl19 KB
- motor_mount.stl136 KB
- multiplexer_enclosure.stl14 KB
- shoulder_mount_spacer.stl48 KB
- shoulder_mount.stl105 KB
- top_plate.dxf374 KB
- wall_no_fan.stl16 KB
- wall_w_fan_1.stl49 KB
- wall_w_fan_2.stl49 KB
Files by @grzesiek2201, at commit 48a8038, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.