← CocoNuts
Project files
- aluminum_profile.part1 KB
- aluminum_profile.stl1 KB
- ankle_alu.part1 KB
- ankle_alu.stl50 KB
- ankle_bearing_cover.part1 KB
- ankle_bearing_cover.stl125 KB
- ankle_mirror.part1 KB
- ankle_mirror.stl190 KB
- ankle_shaft.part1 KB
- ankle_shaft.stl101 KB
- bearing_6802_2rs.part1 KB
- bearing_6802_2rs.stl605 KB
- bearing_6804_2rs.part1 KB
- bearing_6804_2rs.stl605 KB
- bearing_cover_1.part1 KB
- bearing_cover_1.stl126 KB
- benchmark_back_cover.part1 KB
- benchmark_back_cover.stl690 KB
- benchmark_foot.part1 KB
- benchmark_foot.stl149 KB
- benchmark_front_cover.part1 KB
- benchmark_front_cover.stl838 KB
- benchmark_inner_femur.part1 KB
- benchmark_inner_femur.stl280 KB
- benchmark_outer_femur.part1 KB
- benchmark_outer_femur.stl252 KB
- benchmark_outer_hip.part1 KB
- benchmark_outer_hip.stl109 KB
- benchmark_outer_knee.part1 KB
- benchmark_outer_knee.stl134 KB
- din_6325_3mm__configuration__12.part1 KB
- din_6325_3mm__configuration__12.stl29 KB
- din_6325_3mm__configuration__6.part1 KB
- din_6325_3mm__configuration__6.stl29 KB
- din_6325_4mm__configuration__14.part1 KB
- din_6325_4mm__configuration__14.stl101 KB
- din_6325_4mm__configuration__20.part1 KB
- din_6325_4mm__configuration__20.stl101 KB
- inner_crank_alu.part1 KB
- inner_crank_alu.stl100 KB
- inner_crank_mirror.part1 KB
- inner_crank_mirror.stl176 KB
- inner_knee.part1 KB
- inner_knee.stl103 KB
- inner_tibia.part1 KB
- inner_tibia.stl145 KB
- knee_pulley_2.part1 KB
- knee_pulley_2.stl934 KB
- knee_pulley.part1 KB
- knee_pulley.stl934 KB
- middle_crank.part1 KB
- middle_crank.stl52 KB
- motor_pulley.part1 KB
- motor_pulley.stl1.0 MB
- nut_m2_5.part1 KB
- nut_m2_5.stl62 KB
- nut_m3.part1 KB
- nut_m3.stl58 KB
- outer_crank_alu_mirror.part1 KB
- outer_crank_alu_mirror.stl120 KB
- outer_crank.part1 KB
- outer_crank.stl69 KB
- outer_knee_1.part1 KB
- outer_knee_1.stl133 KB
- outer_knee_2.part1 KB
- outer_knee_2.stl290 KB
- outer_tibia.part1 KB
- outer_tibia.stl165 KB
- p210fm_plain_bearing.part1 KB
- p210fm_plain_bearing.stl173 KB
- rmd_x6__2.part1 KB
- rmd_x6__2.stl415 KB
- rmd_x6.part1 KB
- rmd_x6.stl415 KB
- screw_m2_5__configuration__10.part1 KB
- screw_m2_5__configuration__10.stl325 KB
- screw_m2_5__configuration__12.part1 KB
- screw_m2_5__configuration__12.stl325 KB
- screw_m2_5__configuration__140.part1 KB
- screw_m2_5__configuration__140.stl325 KB
- screw_m2_5__configuration__20.part1 KB
- screw_m2_5__configuration__20.stl325 KB
- screw_m2_5__configuration__8.part1 KB
- screw_m2_5__configuration__8.stl325 KB
- screw_m3__configuration__12.part1 KB
- screw_m3__configuration__12.stl174 KB
- shaft_end.part1 KB
- shaft_end.stl53 KB
- threaded_shaft__configuration_ankle.part1 KB
- threaded_shaft__configuration_ankle.stl14 KB
- threaded_shaft__configuration_knee.part1 KB
- threaded_shaft__configuration_knee.stl14 KB
- upper_femur_2.part1 KB
- upper_femur_2.stl182 KB
- washer__configuration_m2_5.part1 KB
- washer__configuration_m2_5.stl29 KB
- washer__configuration_m3.part1 KB
- washer__configuration_m3.stl29 KB
Files by @MarcDcls, at commit 185c56a, read from GitHub in your browser. Hardware license: CERN-OHL-S-2.0; software license: Apache-2.0. Robotheca doesn't review code: read it before running it.