← ALARIS Hand
Project files
- BEVEL5 files
- MATH_CALC25 files
- STL50 files
- thumb14 files
- worm_test18 files
- ~$pos_sens_part.SLDPRT1 KB
- 12teeth_L.SLDPRT1.0 MB
- 13_teeth_1.SLDPRT574 KB
- 13_teeth.SLDPRT45 KB
- 24_teeth_1.SLDPRT780 KB
- 24_teeth.SLDPRT929 KB
- 24teeth.SLDPRT1.4 MB
- 298,1 Micro Metal Gearmotor MP.SLDPRT105 KB
- Alikhan_link.SLDPRT145 KB
- Back_hand_1.SLDPRT2.2 MB
- Back_hand_2.SLDPRT2.6 MB
- Back_hand_new.SLDPRT2.8 MB
- Back_hand.SLDASM851 KB
- Back_hand.SLDPRT2.6 MB
- bearing10mm.SLDPRT90 KB
- bearing12mm.SLDPRT140 KB
- BenchMark.txt1 KB
- cover5_1.SLDPRT879 KB
- cover5_2.SLDPRT923 KB
- cover6.SLDPRT493 KB
- Eperimental Base.SLDPRT419 KB
- Finger Base.SLDPRT194 KB
- Finger Base1.SLDPRT185 KB
- Finger Base2.SLDPRT181 KB
- Finger Base3.SLDPRT203 KB
- force_bridge_v1.SLDPRT150 KB
- force_bridge_v2.SLDPRT129 KB
- force_bridge.SLDPRT75 KB
- force-sensor-for-hand_2.0.sldprt181 KB
- hand_2.SLDPRT2.6 MB
- Hand_base.SLDASM774 KB
- Hand_base.SLDPRT31 KB
- Hand_final_version.SLDASM14.0 MB
- Hex Stand off 1 inch.SLDPRT68 KB
- Lid for palm motors.SLDPRT126 KB
- Link 1.SLDPRT111 KB
- Link 2.SLDPRT76 KB
- M_5th_Left_Palm.SLDPRT4.6 MB
- mold.sldprt1.1 MB
- motor Link2.SLDPRT128 KB
- Motor Lnik test.SLDPRT79 KB
- motor_cover.sldprt166 KB
- New_thumb.SLDASM1.3 MB
- p_sensor.SLDPRT136 KB
- Part 1.SLDPRT405 KB
- Part 2.SLDPRT561 KB
- Part 3 (1).SLDPRT277 KB
- Part 3.SLDPRT429 KB
- Part 4.SLDPRT250 KB
- Part1.SLDPRT105 KB
- Part4^hand_2.0_p1.SLDPRT392 KB
- Part4^hand_2.0_p2.SLDPRT147 KB
- Part6.sldprt348 KB
- PerformanceLog.txt1 KB
- pos_sens_part.SLDPRT89 KB
- position_sensor.SLDPRT127 KB
- Screw 18 mm.SLDPRT101 KB
- Set screw Link 1.SLDPRT146 KB
- stm32f103c8t6-board.SLDPRT338 KB
- swxJRNL.swj1.7 MB
- TestPalm1.1.sldprt8.7 MB
- TestPalm1.1h1.sldprt8.7 MB
- TestPalm1.1h2_1.sldprt8.8 MB
- TestPalm1.1h2_2.sldprt9.3 MB
- TestPalm1.1h2.sldprt8.9 MB
- TestPalm1.sldprt10.4 MB
- TestPalm2.sldprt6.1 MB
- Thumb 1.SLDPRT311 KB
- Thumb link.SLDPRT66 KB
- Thumb motor base1.SLDPRT223 KB
- Thumb motor base2.SLDPRT236 KB
- THUMB_1.1link1.SLDPRT174 KB
- THUMB_1.1tip.SLDPRT336 KB
- Thumb_2.0.SLDASM1.7 MB
- Thumb_2.1.SLDASM118 KB
- THUMB_4.1-Static 1.CWR13.4 MB
- THUMB_4.1-Static 1.LOG1 KB
- THUMB_4.1.SLDPRT424 KB
- Thumb_axis_base_1.SLDPRT516 KB
- Thumb_axis_base.SLDPRT305 KB
- thumb2.0.SLDPRT470 KB
- Thumb2.SLDPRT213 KB
- Thumbs.db371 KB
- Worm Module 1 short pin version.SLDPRT1.5 MB
- Worm_Module.SLDPRT2.2 MB
- worm_new_01.SLDPRT239 KB
- worm_new.SLDPRT1.1 MB
Files by @alarisnu, at commit 251db03, read from GitHub in your browser. Hardware license: GPL-3.0-only; software license: GPL-3.0-only. Robotheca doesn't review code: read it before running it.