← Acrobot Workshop Bot
Project files
- gerber.zip36 KB
- servo_board-B_Cu.gbr32 KB
- servo_board-B_Mask.gbr2 KB
- servo_board-B_Paste.gbr1 KB
- servo_board-B_Silkscreen.gbr59 KB
- servo_board-Edge_Cuts.gbr1 KB
- servo_board-F_Cu.gbr5 KB
- servo_board-F_Mask.gbr2 KB
- servo_board-F_Paste.gbr1 KB
- servo_board-F_Silkscreen.gbr27 KB
- servo_board-job.gbrjob3 KB
- servo_board-NPTH-drl_map.gbr4 KB
- servo_board-NPTH.drl1 KB
- servo_board-PTH-drl_map.gbr45 KB
- servo_board-PTH.drl1 KB
Files by @hapiel, at commit 9a2e5f4, read from GitHub in your browser. Hardware license: CC-BY-4.0; software license: CC-BY-4.0. Robotheca doesn't review code: read it before running it.